How was the latency when monitering in realtime if you have any experience
with that?
----- Original Message -----
From: "Monkey Pusher" <monkeypushe...@gmail.com>
To: <ptaccess@googlegroups.com>
Sent: Friday, September 20, 2013 8:57 AM
Subject: Re: Anyone using the tascam us 2400 Surfase?
It's a pretty straight forward layout of 25 faders .. 24 plus a
master, can be banked so you can deal with up to 192 tracks at a time
with it. Above the faders are rotary pots which i think were assigned
to pan by default in PT. I believe the 3 buttons on each track wer
select, arm, and mute, if memeory serves correct. Also has a jog
wheel. and Has Presets/modes for pro tools, sonar, and most of the
other major DAWS.
On 9/20/13, Poppa Bear <heavens4r...@gmail.com> wrote:
Thanks for that, didn't know if I would get a response. I am going to
look
into it more now.
----- Original Message -----
From: "Monkey Pusher" <monkeypushe...@gmail.com>
To: <ptaccess@googlegroups.com>
Sent: Friday, September 20, 2013 8:52 AM
Subject: Re: Anyone using the tascam us 2400 Surfase?
Used one. It's pretty accessible, no issues with PT 9./10. Once you
get Familiar with all t the buttons on the unit you are up and
running.
On 9/19/13, Jed Barton <j...@jedbarton.com> wrote:
Curious to hear about this myself.
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On
Behalf
Of Poppa Bear
Sent: Thursday, September 19, 2013 11:48 AM
To: ptaccess@googlegroups.com
Subject: Anyone using the tascam us 2400 Surfase?
Anyone using this surface and if so, how is the build, accessibility
and
latency? I am looking to up grade from my 002, but am a little
skeptical
of
a USB interface. I have thought about an RME set up and run my Mackie
onyx
into it, but I don't want to lose my transport functions. Any thoughts?
Nate Kile, Cross Road Recording Studios, specializing in Mixing,
Mastering
and all your audio needs. www.crossroadrecording.com
<http://www.crossroadrecording.com/>
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google
Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google Groups "Pro Tools
Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
