You mean between when u moved a fader and when you heard the change? None. everything was pretty snappy. Only hint of latency was when you loaded a project and it took a split second for the faders to snap into place. Otherwise all worked well.
On 9/20/13, Poppa Bear <heavens4r...@gmail.com> wrote: > How was the latency when monitering in realtime if you have any experience > with that? > ----- Original Message ----- > From: "Monkey Pusher" <monkeypushe...@gmail.com> > To: <ptaccess@googlegroups.com> > Sent: Friday, September 20, 2013 8:57 AM > Subject: Re: Anyone using the tascam us 2400 Surfase? > > >> It's a pretty straight forward layout of 25 faders .. 24 plus a >> master, can be banked so you can deal with up to 192 tracks at a time >> with it. Above the faders are rotary pots which i think were assigned >> to pan by default in PT. I believe the 3 buttons on each track wer >> select, arm, and mute, if memeory serves correct. Also has a jog >> wheel. and Has Presets/modes for pro tools, sonar, and most of the >> other major DAWS. >> >> On 9/20/13, Poppa Bear <heavens4r...@gmail.com> wrote: >>> Thanks for that, didn't know if I would get a response. I am going to >>> look >>> into it more now. >>> ----- Original Message ----- >>> From: "Monkey Pusher" <monkeypushe...@gmail.com> >>> To: <ptaccess@googlegroups.com> >>> Sent: Friday, September 20, 2013 8:52 AM >>> Subject: Re: Anyone using the tascam us 2400 Surfase? >>> >>> >>>> Used one. It's pretty accessible, no issues with PT 9./10. Once you >>>> get Familiar with all t the buttons on the unit you are up and >>>> running. >>>> >>>> On 9/19/13, Jed Barton <j...@jedbarton.com> wrote: >>>>> Curious to hear about this myself. >>>>> >>>>> >>>>> >>>>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On >>>>> Behalf >>>>> Of Poppa Bear >>>>> Sent: Thursday, September 19, 2013 11:48 AM >>>>> To: ptaccess@googlegroups.com >>>>> Subject: Anyone using the tascam us 2400 Surfase? >>>>> >>>>> >>>>> >>>>> Anyone using this surface and if so, how is the build, accessibility >>>>> and >>>>> latency? I am looking to up grade from my 002, but am a little >>>>> skeptical >>>>> >>>>> of >>>>> a USB interface. I have thought about an RME set up and run my Mackie >>>>> onyx >>>>> into it, but I don't want to lose my transport functions. Any >>>>> thoughts? >>>>> >>>>> Nate Kile, Cross Road Recording Studios, specializing in Mixing, >>>>> Mastering >>>>> and all your audio needs. www.crossroadrecording.com >>>>> <http://www.crossroadrecording.com/> >>>>> >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups >>>> >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an >>>> >>>> email to ptaccess+unsubscr...@googlegroups.com. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
