Hi, This has to be tested. One question though, if i uncheck that port, can i still set parameters in the plugin using the 003? /Krister
> 16 sep 2014 kl. 15:55 skrev Eric Lambier <elamb...@rogers.com>: > > Hi Krister > > I had a similar problem where the digi 003 buttons were triggering my sounds > in plug-ins such as superior drummer, trillion etc. This is what I did to fix > my problem. Not sure if it'll work for yours but give it a try and see. > > Go to menu, control-option-M > Arrow right to set up > Arrow down to midi sub menu > arrow right and go to the bottom of four items > The bottom one will be imput devices, hit enter. > You'll then have two choices of checking or unchecking. the first is port 1 > and the latter is port 3. > Uncheck port 3 and then arrow down to ok. > This fixed my problem. If it doesn't fix yours you can repeat the above steps > and recheck port 3. > Hope this helps! > > Let me know if that worked. > > Eric > On Sep 15, 2014, at 11:35 PM, Slau Halatyn <slauhala...@gmail.com> wrote: > >> Hi Krister, >> >> I understand that everybody's situation is unique. You must also understand >> that there are some things that are simply not possible without some sighted >> assistance at some point. I take your response at face value just as you >> should take mine. It's a plain and sometimes cold truth. Some things you'll >> just have to do when you have the opportunity to sit with somebody to go >> over some stuff. In the mean time, if anybody on the list can help >> otherwise, i'm sure people are more than willing to help with whatever they >> can. Don't lose hope. >> >> cheers, >> >> Slau >> >> On Sep 15, 2014, at 5:57 PM, Nick Gawronski <n...@nickgawronski.com> wrote: >> >>> Hi, One thing that I did when I got my digi 003 was to talk to the sales >>> manager at the store who helpt me order it on line and get it sent to my >>> house. They explained that they could provide some assistive support such >>> as installation help and some troubleshooting. I would suggest if you have >>> a local electronic store that sells pro audio products you contact them and >>> explain what is going on and also tell them you are totally blind and you >>> need sited help with some tasks. They might be able to remote into your >>> computer to take a look at the problem or you could ask if one of the sales >>> people could come out to your location to do some troubleshooting. I would >>> also suggest you call Avid support as they are very good at small things >>> and have helpt me out even when I did not buy a support contract if it is >>> just a small issue as they can remote into your mac with your permition of >>> course and possibley could walk you through some steps to see if they can >>> identify the issues you are having. Nick Gawronski >>> On 9/15/2014 12:19 PM, Krister Ekstrom wrote: >>>> Hi, >>>> Sighted assistance is good if you have it, unfortunately i don't. The >>>> music vendors i've spoken with are as confused as i over this problem and >>>> as i say no sighties in the vicinity except for home help who a: are very, >>>> very pressed for time and B: don't have the slightest inkling of what i'm >>>> talking about. >>>> Please don't get me wrong, i'm not saying this to diss you in any way, i'm >>>> just trying to explain the situation here. >>>> /Krister >>>> >>>>> 15 sep 2014 kl. 18:06 skrev Slau Halatyn <slauhala...@gmail.com>: >>>>> >>>>> Hi Krister, >>>>> >>>>> Like many of the people who came before you down this path of learning >>>>> and discovery, you're probably going to have to have sighted assistance >>>>> from time to time to verify the behavior that you're experiencing. While >>>>> you have that assistance, you'll have to experiment and learn the >>>>> behavior that is specific to your system, your setup, etc. Yes, there are >>>>> certain things that translate easily from user to user but, ultimately, >>>>> everybody's situation can be a little different and it is precisely there >>>>> that one little tiny thing can make all the difference in the world. >>>>> Don't be discouraged, you can experiment on your own but it's likely that >>>>> you will run into obstacles you won't understand without some sighted >>>>> confirmation. It's good to go it alone to learn where the problem areas >>>>> occur and then get a little help to identify exactly what's going on, >>>>> document it and tackle things a little bit at a time. >>>>> >>>>> Best, >>>>> >>>>> Slau >>>>> >>>>> On Sep 15, 2014, at 11:53 AM, Krister Ekstrom <kris...@kristersplace.com> >>>>> wrote: >>>>> >>>>>> Hi there again. >>>>>> I was trying to experiment with changing plugin parameters with my >>>>>> Digi003 on an Arturia Jupiter8v that i just bought. Now i have this >>>>>> strange problem that i also had with Addictive drums. It seems like the >>>>>> Digi003 is sending midi events that trigger sounds in my plugins, >>>>>> however if i select another midi out port from within the instruments >>>>>> view of my instrument track, i can't operate the plugin from the 003, >>>>>> something that probably is just right, so how on Gods green earthe do i >>>>>> change and play with values of parameters with the 003 without >>>>>> necessarily sending midi data that trigger sounds on my plugin >>>>>> instruments? >>>>>> /Krister >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to ptaccess+unsubscr...@googlegroups.com. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to ptaccess+unsubscr...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
