Hi Brian, After having used Digidesign/Avid interfaces, I switched to Apogee. All Apogee interfaces, from the Duet up to the Symphony, use the same software for control and that is the Maestro software. Just about the only thing that's not accessible (as far as I can tell) is the main volume but there's a giant physical knob right on the front of every Apogee interface so it's not an issue. The controls in Maestro could probably be labelled a little better but it's pretty easy to figure out what's going on within the various tabs. Frankly, once you set it, you pretty much forget it. I've used the Symphony as well as the Duet and I'm sure that any other apogee interface is equally accessible with two exceptions: The Pro Tools Duet and the Pro Tools Quartet. Don't buy either of those units because they use their own proprietary software. Any of the normal Apogee-branded interfaces work fabulously.
HTH, Slau On Nov 17, 2015, at 5:17 PM, Brian Howerton <bshowert...@gmail.com> wrote: > Hello all, > Just want to find out what people are using as far as audio interfaces with > protools, in particular, audio interfaces with accessible mix control > software. What interfaces have accessible mix control software with > voiceover? I am very curious to see what people are using. Thanks, > Brian > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
