Another good trick is to use an external timer to turn a radio receiver on and off at preselected times. Then set the plextalk to record when it senses sound.
Frank Cuta -----Original Message----- From: Andrew Hodgson [mailto:[EMAIL PROTECTED] Sent: Saturday, December 18, 2004 6:28 AM To: [EMAIL PROTECTED] Subject: RE: RE: timer questions Hi, That is an interesting way round the problem. Thanks, will note for future reference. Andrew. -----Original Message----- From: Dan [mailto:[EMAIL PROTECTED] Sent: 18 December 2004 01:38 To: [EMAIL PROTECTED] Subject: RE: timer questions Hi, This is what I do. Because the switch is spring-loaded and because it can sometimes be difficult to put the switch in the middle position, I do this. Switch the unit off. Even before the shut-down process completes, I turn the unit back on. The switch always returns to the middle position, this is the neutral position. Perhaps another way to put it is this. Turn the unit off, wait about a second ant turn the unit back on, leaving the switch in the middle position the unit will still shut down but the electronics will be set to allow the on timer to work. Dan [EMAIL PROTECTED] -----Original Message----- From: Sharon Hamm [mailto:[EMAIL PROTECTED] Sent: Friday, December 17, 2004 4:57 PM To: [EMAIL PROTECTED] Subject: timer questions Hello. I'm wanting to set the timer to come on at a certain time and go off at a certain time. How do I do that? I can't figure out how to do it and have followed the prompts to set it up. Also, do the unit have to be on or off? Sharon --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.0 - Release Date: 12/17/2004 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database: 265.6.0 - Release Date: 12/17/2004 --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
