Hi Gary, On Sunday 04 November 2007 18:41, Gary Thomas wrote: > Juergen Beisert wrote: > > On Friday 02 November 2007 17:53, Gary Thomas wrote: > >> Gary Thomas wrote: > >>> Juergen Beisert wrote: > >>>> Gary, > >>>> > >>>> On Friday 02 November 2007 14:27, Gary Thomas wrote: > >>>>>> Better use the OSELAS.Toolchain-Project. It supports more recent > >>>>>> toolchains, the crosstool part is outdated. > >>>>> > >>>>> I got started on this, but ran into some troubles. The GCC snapshot > >>>>> gcc-4.2-20070207 is no longer available, so I tried to build the > >>>>> tools using the released version of gcc-4.2.2. This went pretty > >>>>> well, until I tried to build busybox: > >>>>> > >>>>> /opt/OSELAS.Toolchain-1.1.0/i586-unknown-linux-gnu/gcc-4.2.2-glibc-2. > >>>>>5- kern > >>>>> el-2.6.18/sysroot-i586-unknown-linux-gnu/usr/include/sys/syscall.h:32 > >>>>>:2 7: error: bits/syscall.h: No such file or directory > >>>> > >>>> Hmm, GCC 4.2.2 in OSELAS.Toolchain-1.1.0? Did you select this version > >>>> of gcc by your own? Perhaps you should start with GCC 4.1.2 from the > >>>> OSELAS.Toolchain-1.1.0 project. Or wait for our next OSELAS.Toolchain > >>>> release. This also should support GCC 4.2. > >>> > >>> As mentioned, I tried to select the configuration which uses > >>> gcc-4.2-20070207, but that is no longer available, so I tried > >>> to use the released version gcc-4.2.2 > >>> > >>> I'm trying 4.1.2 now. > >> > >> Sadly, I get the same error. > >> > >> /opt/OSELAS.Toolchain-1.1.0/i586-unknown-linux-gnu/gcc-4.1.2-glibc-2.5-k > >>ern > >> el-2.6.18/sysroot-i586-unknown-linux-gnu/usr/include/sys/syscall.h:32:27 > >>: error: bits/syscall.h: No such file or directory > >> > >> Has anyone successfully built an i586 toolchain and then used > >> it to build ptxdist-1.0.1 (OSELAS.BSP-Pengutronix-GenericI586Glibc-3)? > > > > Attached my toolchain I'm using for my x86 terminal projects. But it has > > to be built with ptxdist-0.10.6! And note: All OSELAS.Toolchains in 1.1.0 > > are tested with ptxdist-0.10.6 only. > > I took your toolchain setup and rebuilt using 0.10.6, then I tried my > [default] configuration on 1.0.1 and got the same result :-( > > /opt/OSELAS.Toolchain-1.1.0/i586-pmmx-linux-gnu/gcc-4.1.2-glibc-2.5-kernel- >2.6.18/sysroot-i586-pmmx-linux-gnu/usr/include/sys/syscall.h:32:27: error: > bits/syscall.h: No such file or directory
Does this directory exists on your host? /opt/OSELAS.Toolchain-1.1.0/i586-pmmx-linux-gnu/gcc-4.1.2-glibc-2.5-kernel-2.6.18/sysroot-i586-pmmx-linux-gnu/usr/include/bits Can you send me your "logfile" (should exists in the root directory of your project when you are trying to build it). And the logfile from the toolchain build. Maybe it could help to find the "mistake" in your environment. What kind of linux system do you use? > Juergen - perhaps you could put your actual toolchain on my FTP site? Yes. On the way... Juergen -- Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Vertretung Sued/Muenchen, Germany Phone: +49-8766-939 228 | Fax: +49-5121-206917-9 -- ptxdist mailing list ptxdist@pengutronix.de
