ok, very thank, i will to try
bye
----- Original Message -----
From: Richard Geddes
To: General PulseAudio Discussion
Sent: Tuesday, June 03, 2008 8:00 PM
Subject: Re: [pulseaudio-discuss] Help in setting up PA... SOLVED
#.ifexists module-hal-detect.so
#load-module module-hal-detect
#.else
#load-module module-detect
#.endif
I forgot to mention, to see error/warning messages I used:
grep pulse /var/log/messages
there may be better ways, though
Juan A Fuentes Bermudez wrote:
hi
very thank , i will try this, only aquestion:
to coment the autodetec module what is the corret?
#.ifexists module-hal-detect.so
#load-module module-hal-detect
#.else
#load-module module-detect
#.endif
or
.ifexists module-hal-detect.so
#load-module module-hal-detect
.else
#load-module module-detect
.endif
very thank
----- Original Message -----
From: Richard Geddes
To: General PulseAudio Discussion
Sent: Tuesday, June 03, 2008 6:02 PM
Subject: Re: [pulseaudio-discuss] Help in setting up PA... SOLVED
Now as I understand it, when linux starts,
1) there is a program called hald (hardware abstraction layer daemon)
that identifies the hardware attached to your computer. In the output of
aplay, each card is given an identifier... "tarjeta {0 -3}"
2) other programs like pa use the info hald provides to make decisions
about how to use the hardware.
In the case of tarjeta 2 - EWX2496 using the ice1712 driver (this same
chip is in my tarjeta), apparently pulseaudio or hald did not identify it
correctly, and when trying to connect to this tarjeta, pa realizes this and
says no.
The default global pa config file (/etc/pulse/default.pa) in ubuntu has
these statements:
.ifexists module-hal-detect.so
load-module module-hal-detect
.else
load-module module-detect
.endif
which is a means of auto-detecting the tarjetas on your system. Let's
change this:
1) make a copy of your original global config file
cd /etc/pulse/
sudo cp default.pa default.pa.original
2) comment out the lines that deal with auto detecting the tarjetas (the
lines above)
3) Add these lines in it's place: sudo [vi,gedit,...] default.pa
------------
# Load the devices:
load-module module-alsa-sink sink_name=nvidia_out device=hw:0
load-module module-alsa-source source_name=nvidia_in device=hw:0
load-module module-alsa-sink sink_name=hdmi_out device=hw:1
load-module module-alsa-source source_name=hdmi_in device=hw:1
load-module module-alsa-sink sink_name=ewx2496_out device=hw:2
channels=10 channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
load-module module-alsa-source source_name=ewx2496_in device=hw:2
channels=12
channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9
load-module module-alsa-sink sink_name=e192m_out device=hw:3
load-module module-alsa-source source_name=e192m_in device=hw:3
# Select default device
set-default-sink nvidia_out
set-default-source nvidia_in
------------------------
Note: We are telling pa to use devices identified by your system labeled
hw:{0,1,2,3}... nothing special, except for the ewx2496 that uses the ice1712
device driver. This is the same chip my tarjeta uses, and in that case I had
to add extra information about the chip... the part that says "channel_map=..."
I'm not sure if the other tarjetas need special mappings or instructions, but
give this a try.
4) Restart pa ... in ubuntu, I would try "sudo /etc/init.d/pulseaudio
{start,stop,...} and it would not give feedback if the server status had
changed. So I would use the pa manager (paman) to start/stop the pa server.
Frequently, I would not know if the server was still running and would use "ps
aux | grep pulse" to check status.
Let's see what happens
Juan A Fuentes Bermudez wrote:
1) Tell me which cards are identified by the alsamixer and which cards
are identified by pa(pulseaudio).
asoundconf list
Names of available sound cards:
NVidia (identified by PA)
HDMI
EWX2496
E192M (identified by PA)
aplay -l
**** Lista de PLAYBACK Dispositivos Hardware ****
tarjeta 0: NVidia [HDA NVidia], dispositivo 0: AD198x Analog [AD198x
Analog]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 0: NVidia [HDA NVidia], dispositivo 1: AD198x Digital [AD198x
Digital]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 1: HDMI [HDA ATI HDMI], dispositivo 3: ATI HDMI [ATI HDMI]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 2: EWX2496 [TerraTec EWX24/96], dispositivo 0: ICE1712 multi
[ICE1712 multi]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 3: E192M [ESI Waveterminal 192M], dispositivo 0: ICE1724
[ICE1724]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 3: E192M [ESI Waveterminal 192M], dispositivo 1: ICE1724
Secondary [ICE1724 Secondary]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 3: E192M [ESI Waveterminal 192M], dispositivo 2: ICE1724
Surrounds [ICE1724 Surround PCM]
Subdispositivos: 3/3
Subdispositivo #0: subdevice #0
Subdispositivo #1: subdevice #1
Subdispositivo #2: subdevice #2
2) Can you make sound with your speakers with pa and the cards that it
does identify?
yes i need to route the sound thru the no identified sound cards via PA
when i por example, play a mp3, i can route via alsa the sound thru
devices that no identified in PA, i am sure that card is runing correctly
sorry and very thank
------------------------------------------------------------------------
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
--------------------------------------------------------------------------
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
----------------------------------------------------------------------------
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
------------------------------------------------------------------------------
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
