When I see things like the following, I smell trouble:
(venv)[ec2-user@ip-172-31-13-110 ~]$ virtualenv -p python3 deprecation
(deprecation)[ec2-user@ip-172-31-13-110 ~]$ pip install pyramid
^^^ activated virtual environments, but where am I on the
system? ¯\_(ツ)_/¯
We used to get lots of questions about Pyramid installation
problems in IRC, most of which had nothing to do with Pyramid.
Almost always it boiled down to either misuse of activate,
mixing easy_install with pip, or a lack of understanding of a
Python virtual environment. We straightened it all out in our docs.
AWS can give you Python 3.4, which includes the minimum
requirements for installing packages. After that, you can pick
up from this point in the Pyramid docs, and Bob's your uncle:
http://docs.pylonsproject.org/projects/pyramid/en/latest/narr/install.html#installing-pyramid-on-a-unix-system
Let me point out that the following commands are almost the same thing.
# Use explicit path to executable
# (this command will also upgrade pip and setuptools, ending the
nanny warning, too)
$ /path/to/virtual/environment/bin/pip install --upgrade pip setuptools
# Use explicit path to executable via an environment variable
set by
# $ export VENV=/path/to/virtual/environment
$ $VENV/bin/pip install --upgrade pip setuptools
# while in the virtual environment directory:
# $ source bin/activate
$ (environment)$ pip install --upgrade pip setuptools
We recommend the second method, then the first, and avoid the
third unless you know the implications of activate.
At this point, I'd recommend blowing away the virtual
environment, and trying this documented method instead of the
activate stuff, and see if that gets you further along.
--steve
On 3/15/17 at 11:03 PM, wpu.cl...@gmail.com (Dan Clark) pronounced:
I think I figured it out. go to the bottom for the actual issue. Hint it's
not a permission issue. If you're good you might be able to figure it out
before the end.
I decided to get as basic as possible. I SSH'ed into the EC2 VM and with in
my home directory I used virtualenv to create a venv.
(venv)[ec2-user@ip-172-31-13-110 ~]$ virtualenv -p python3 deprecation
Running virtualenv with interpreter /opt/python/run/venv/bin/python3
Using real prefix '/usr'
New python executable in deprecation/bin/python3
Also creating executable in deprecation/bin/python
Installing setuptools, pip...done.
Then I installed pyramid into that venv
(deprecation)[ec2-user@ip-172-31-13-110 ~]$ pip install pyramid
You are using pip version 6.0.8, however version 9.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
Collecting pyramid
Downloading pyramid-1.8.3-py2.py3-none-any.whl (574kB)
100% |################################| 577kB 511kB/s
Collecting PasteDeploy>=1.5.0 (from pyramid)
Downloading PasteDeploy-1.5.2-py2.py3-none-any.whl
Collecting zope.deprecation>=3.5.0 (from pyramid)
Downloading zope.deprecation-4.2.0-py2.py3-none-any.whl
Collecting repoze.lru>=0.4 (from pyramid)
Downloading repoze.lru-0.6.tar.gz
Collecting venusian>=1.0a3 (from pyramid)
Downloading venusian-1.0.tar.gz (45kB)
100% |################################| 49kB 3.5MB/s
Collecting WebOb>=1.7.0rc2 (from pyramid)
Downloading WebOb-1.7.1-py2.py3-none-any.whl (83kB)
100% |################################| 86kB 2.6MB/s
Collecting hupper (from pyramid)
Downloading hupper-0.4.4-py2.py3-none-any.whl
Requirement already satisfied (use --upgrade to upgrade): setuptools in
./deprecation/lib/python3.4/site-packages (from pyramid)
Collecting translationstring>=0.4 (from pyramid)
Downloading translationstring-1.3-py2.py3-none-any.whl
Collecting zope.interface>=3.8.0 (from pyramid)
Downloading zope.interface-4.3.3.tar.gz (150kB)
100% |################################| 151kB 1.7MB/s
Installing collected packages: zope.interface, translationstring, hupper,
WebOb, venusian, repoze.lru, zope.deprecation, PasteDeploy, pyramid
Running setup.py install for zope.interface
building 'zope.interface._zope_interface_coptimizations' extension
gcc -pthread -Wno-unused-result -DDYNAMIC_ANNOTATIONS_ENABLED=1
-DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic
-D_GNU_SOURCE -fPIC -fwrapv -fPIC -I/usr/include/python3.4m -c
src/zope/interface/_zope_interface_coptimizations.c -o
build/temp.linux-x86_64-3.4/src/zope/interface/_zope_interface_coptimizations.o
src/zope/interface/_zope_interface_coptimizations.c:34:1: warning:
"METH_KEYWORDS" redefined
In file included from /usr/include/python3.4m/Python.h:90,
from
src/zope/interface/_zope_interface_coptimizations.c:15:
/usr/include/python3.4m/methodobject.h:56:1: warning: this is the
location of the previous definition
gcc -pthread -shared
build/temp.linux-x86_64-3.4/src/zope/interface/_zope_interface_coptimizations.o
-L/usr/lib64 -lpython3.4m -o build/lib.linux-x86_64-3.4/zope/interface/_
zope_interface_coptimizations.cpython-34m.so
Skipping installation of
/home/ec2-user/deprecation/lib64/python3.4/site-packages/zope/__init__.py
(namespace package)
Installing
/home/ec2-user/deprecation/lib64/python3.4/site-packages/zope.interface-4.3.3-py3.4-nspkg.
pth
Running setup.py install for venusian
Running setup.py install for repoze.lru
Skipping installation of
/home/ec2-user/deprecation/lib/python3.4/site-packages/repoze/__init__.py
(namespace package)
Installing
/home/ec2-user/deprecation/lib/python3.4/site-packages/repoze.lru-0.6-py3.4-nspkg.pth
Successfully installed PasteDeploy-1.5.2 WebOb-1.7.1 hupper-0.4.4
pyramid-1.8.3 repoze.lru-0.6 translationstring-1.3 venusian-1.0
zope.deprecation-4.2.0 zope.interface-4.3.3
And then checked for zope.deprecation
(deprecation)[ec2-user@ip-172-31-13-110 ~]$ pip freeze
You are using pip version 6.0.8, however version 9.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
hupper==0.4.4
PasteDeploy==1.5.2
pyramid==1.8.3
repoze.lru==0.6
translationstring==1.3
venusian==1.0
WebOb==1.7.1
zope.deprecation==4.2.0
zope.interface==4.3.3
Then I jumped into python and imported pip and made sure I still could see
it.
(deprecation)[ec2-user@ip-172-31-13-110 deprecation]$ python
Python 3.4.3 (default, Sep 1 2016, 23:33:38)
[GCC 4.8.3 20140911 (Red Hat 4.8.3-9)] on linux
Type "help", "copyright", "credits" or "license" for more information.
import pip #needed to use the pip functions
for i in pip.get_installed_distributions(local_only=True):
... print(i)
...
zope.interface 4.3.3
pip 6.0.8
pyramid 1.8.3
zope.deprecation 4.2.0
translationstring 1.3
venusian 1.0
PasteDeploy 1.5.2
repoze.lru 0.6
setuptools 12.0.5
WebOb 1.7.1
hupper 0.4.4
Then I tried to import zope.deprecation, but ng
from zope.deprecation import deprecated
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named 'zope.deprecation'
From here it didn't make sense. I went into site-packages and
zope.deprecation was there, BUT zope.interfaces was missing, but it was
still working? Pip happily reported that zope.interface was still there
Then as I was uninstalling/installing with various options I noticed the
paths. zope.deprecation was in lib and zope.interface was in lib64
(deprecation)[ec2-user@ip-172-31-13-110 site-packages]$ pwd
/home/ec2-user/deprecation/lib/python3.4/site-packages
(deprecation)[ec2-user@ip-172-31-13-110 site-packages]$ ls -l
total 412
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:34 appdirs-1.4.3.dist-info
-rw-rw-r-- 1 ec2-user ec2-user 24701 Mar 16 02:34 appdirs.py
-rw-rw-r-- 1 ec2-user ec2-user 126 Mar 16 02:34 easy_install.py
drwxrwxr-x 3 ec2-user ec2-user 4096 Mar 16 02:13 hupper
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:13 hupper-0.4.4.dist-info
drwxrwxr-x 3 ec2-user ec2-user 4096 Mar 16 02:34 packaging
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:34 packaging-16.8.dist-info
drwxrwxr-x 3 ec2-user ec2-user 4096 Mar 16 02:13 paste
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:13
PasteDeploy-1.5.2.dist-info
-rw-rw-r-- 1 ec2-user ec2-user 304 Mar 16 02:13
PasteDeploy-1.5.2-py2.6-nspkg.pth
drwxrwxr-x 11 ec2-user ec2-user 4096 Mar 16 02:33 pip
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:33 pip-9.0.1.dist-info
drwxrwxr-x 3 ec2-user ec2-user 4096 Mar 16 02:34 pkg_resources
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:34 __pycache__
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:34
pyparsing-2.2.0.dist-info
-rw-rw-r-- 1 ec2-user ec2-user 231039 Mar 16 02:34 pyparsing.py
drwxrwxr-x 7 ec2-user ec2-user 4096 Mar 16 02:13 pyramid
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:13 pyramid-1.8.3.dist-info
drwxrwxr-x 3 ec2-user ec2-user 4096 Mar 16 02:13 repoze
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:13
repoze.lru-0.6-py3.4.egg-info
-rw-rw-r-- 1 ec2-user ec2-user 305 Mar 16 02:13
repoze.lru-0.6-py3.4-nspkg.pth
drwxrwxr-x 4 ec2-user ec2-user 4096 Mar 16 02:34 setuptools
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:34
setuptools-34.3.2.dist-info
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:34 six-1.10.0.dist-info
-rw-rw-r-- 1 ec2-user ec2-user 30098 Mar 16 02:34 six.py
drwxrwxr-x 4 ec2-user ec2-user 4096 Mar 16 02:13 translationstring
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:13
translationstring-1.3.dist-info
drwxrwxr-x 5 ec2-user ec2-user 4096 Mar 16 02:13 venusian
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:13
venusian-1.0-py3.4.egg-info
drwxrwxr-x 3 ec2-user ec2-user 4096 Mar 16 02:13 webob
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:13 WebOb-1.7.1.dist-info
drwxrwxr-x 3 ec2-user ec2-user 4096 Mar 16 02:42 zope
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:42
zope.deprecation-4.2.0.dist-info
-rw-rw-r-- 1 ec2-user ec2-user 349 Mar 16 02:42
zope.deprecation-4.2.0-py2.7-nspkg.pth
(deprecation)[ec2-user@ip-172-31-13-110 site-packages]$ cd zope
(deprecation)[ec2-user@ip-172-31-13-110 zope]$ ls -l
total 4
drwxrwxr-x 3 ec2-user ec2-user 4096 Mar 16 02:42 deprecation
(deprecation)[ec2-user@ip-172-31-13-110 zope]$
And zope.interface...
(deprecation)[ec2-user@ip-172-31-13-110 site-packages]$ pwd
/home/ec2-user/deprecation/lib64/python3.4/site-packages
(deprecation)[ec2-user@ip-172-31-13-110 site-packages]$ ls -l
total 12
drwxrwxr-x 3 ec2-user ec2-user 4096 Mar 16 02:42 zope
drwxrwxr-x 2 ec2-user ec2-user 4096 Mar 16 02:42
zope.interface-4.3.3-py3.4.egg-info
-rw-rw-r-- 1 ec2-user ec2-user 529 Mar 16 02:42
zope.interface-4.3.3-py3.4-nspkg.pth
(deprecation)[ec2-user@ip-172-31-13-110 site-packages]$ cd zope
(deprecation)[ec2-user@ip-172-31-13-110 zope]$ ls -l
total 4
drwxrwxr-x 5 ec2-user ec2-user 4096 Mar 16 02:42 interface
(deprecation)[ec2-user@ip-172-31-13-110 zope]$
My thought was that perhaps the interpreter was getting confused because it
found zope under lib64 but not deprecate and just gave up.To test this out
I tried uninstalling zope.interface, and I was now able to import
zope.deprecate!
SO NOW WHAT??
Anyway, I am going to sleep. I doubt I'll work on this tomorrow morning,
but if anyone can tell me how to trick the pip into installing
zope.interface into lib/site-packages instead of lib64/site-packages, I'd
appreciate it.
Thanks,
--Dan
On Wed, Mar 15, 2017 at 9:38 PM, Dan Clark <wpu.cl...@gmail.com> wrote:
Here's the traceback
[Thu Mar 16 01:36:38.429962 2017] [:error] [pid 2187] [remote
69.127.251.49:50376] mod_wsgi (pid=2187): Target WSGI script
'/opt/python/current/app/application.py' cannot be loaded as Python
module.
[Thu Mar 16 01:36:38.430078 2017] [:error] [pid 2187] [remote
69.127.251.49:50376] mod_wsgi (pid=2187): Exception occurred processing
WSGI script '/opt/python/current/app/application.py'.
[Thu Mar 16 01:36:38.430145 2017] [:error] [pid 2187] [remote
69.127.251.49:50376] Traceback (most recent call last):
[Thu Mar 16 01:36:38.430237 2017] [:error] [pid 2187] [remote
69.127.251.49:50376] File "/opt/python/current/app/application.py",
line 2, in <module>
[Thu Mar 16 01:36:38.430255 2017] [:error] [pid 2187] [remote
69.127.251.49:50376] from pyramid.config import Configurator
[Thu Mar 16 01:36:38.430314 2017] [:error] [pid 2187] [remote
69.127.251.49:50376] File "/opt/python/run/venv/lib/
python3.4/site-packages/pyramid/config/__init__.py", line 12, in <module>
[Thu Mar 16 01:36:38.430329 2017] [:error] [pid 2187] [remote
69.127.251.49:50376] from pyramid.interfaces import (
[Thu Mar 16 01:36:38.430383 2017] [:error] [pid 2187] [remote
69.127.251.49:50376] File "/opt/python/run/venv/lib/
python3.4/site-packages/pyramid/interfaces.py", line 1, in <module>
[Thu Mar 16 01:36:38.430399 2017] [:error] [pid 2187] [remote
69.127.251.49:50376] from zope.deprecation import deprecated
[Thu Mar 16 01:36:38.430444 2017] [:error] [pid 2187] [remote
69.127.251.49:50376] ImportError: No module named 'zope.deprecation'
[Thu Mar 16 01:36:38.569219 2017] [:error] [pid 2187] [remote
69.127.251.49:54728] mod_wsgi (pid=2187): Target WSGI script
'/opt/python/current/app/application.py' cannot be loaded as Python
module.
[Thu Mar 16 01:36:38.569285 2017] [:error] [pid 2187] [remote
69.127.251.49:54728] mod_wsgi (pid=2187): Exception occurred processing
WSGI script '/opt/python/current/app/application.py'.
[Thu Mar 16 01:36:38.569339 2017] [:error] [pid 2187] [remote
69.127.251.49:54728] Traceback (most recent call last):
[Thu Mar 16 01:36:38.569418 2017] [:error] [pid 2187] [remote
69.127.251.49:54728] File "/opt/python/current/app/application.py",
line 2, in <module>
[Thu Mar 16 01:36:38.569435 2017] [:error] [pid 2187] [remote
69.127.251.49:54728] from pyramid.config import Configurator
[Thu Mar 16 01:36:38.569493 2017] [:error] [pid 2187] [remote
69.127.251.49:54728] File "/opt/python/run/venv/lib/
python3.4/site-packages/pyramid/config/__init__.py", line 12, in <module>
[Thu Mar 16 01:36:38.569509 2017] [:error] [pid 2187] [remote
69.127.251.49:54728] from pyramid.interfaces import (
[Thu Mar 16 01:36:38.569563 2017] [:error] [pid 2187] [remote
69.127.251.49:54728] File "/opt/python/run/venv/lib/
python3.4/site-packages/pyramid/interfaces.py", line 1, in <module>
[Thu Mar 16 01:36:38.569595 2017] [:error] [pid 2187] [remote
69.127.251.49:54728] from zope.deprecation import deprecated
[Thu Mar 16 01:36:38.569638 2017] [:error] [pid 2187] [remote
69.127.251.49:54728] ImportError: No module named 'zope.deprecation'
On Wed, Mar 15, 2017 at 3:17 PM, Tres Seaver <tsea...@palladion.com>
wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 03/15/2017 07:23 AM, Dan Clark wrote:
> Tres,
>
> I just committed the hello pyramid project to
> https://github.com/adidas/aws_hello_pyramid. It's a simple script
> (with requirements.txt) that can be tweaked to recreate the issue on
> AWS. Just need to change the requirements.txt to use 4.2.
>
> Anyway, I ran out of time today, but if you give me another morning I
> can upload the project with 4.2 and get the complete traceback.
Dan,
Thanks for working on it, and for documenting your path. If you figure
something out about why you are needing to pin zope.deprecation, please
create an issue for either pyramid[1] or zope.deprecation[2] and mentaion
me (@tseaver) in the description.
[1] https://github.com/Pylons/pyramid/issues/
[2] https://github.com/zopefoundation/zope.deprecation/issues
Tres.
- --
===================================================================
Tres Seaver +1 540-429-0999 tsea...@palladion.com
Palladion Software "Excellence by Design" http://palladion.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=soKF
-----END PGP SIGNATURE-----
--
You received this message because you are subscribed to a topic in the
Google Groups "pylons-discuss" group.
To unsubscribe from this topic, visit https://groups.google.com/d/to
pic/pylons-discuss/MSAMBzwx7aQ/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
pylons-discuss+unsubscr...@googlegroups.com.
To post to this group, send email to pylons-discuss@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/ms
gid/pylons-discuss/oac412%24p8k%241%40blaine.gmane.org.
For more options, visit https://groups.google.com/d/optout.
------------------------
Steve Piercy, Soquel, CA
--
You received this message because you are subscribed to the Google Groups
"pylons-discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to pylons-discuss+unsubscr...@googlegroups.com.
To post to this group, send email to pylons-discuss@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/pylons-discuss/r473Ps-10123i-2C8B88E6B4804511BFCE836EC6CEAE61%40Steves-iMac.local.
For more options, visit https://groups.google.com/d/optout.
