Can you provide the error message?
2011/8/25 Bjoern-oliver Gohlke <
bjoern-oliver.goh...@student.uni-tuebingen.de>
> Hi,
>
> I actual try to get the coordinates of the mesh from a protein/selection.
>
> At first I run the following command:
> open("pymol.mesh","w").write( cmd.get_povray()[1] )
>
> There I get points shifted by one axis or something like that.
> Then somebody here from the mailinglist tells me that I have to use
> cmd.get_object_matrix.
> I read in the Wiki how to use this command.
> (http://www.pymolwiki.org/index.php/Get_object_matrix)
> But when I try to run the example with my points and the protein I
> always get an error.
> Can sombody help me, or tell me what I do wrong??
>
> Thanks in advance,
> Björn
>
>
>
> ------------------------------------------------------------------------------
> EMC VNX: the world's simplest storage, starting under $10K
> The only unified storage solution that offers unified management
> Up to 160% more powerful than alternatives and 25% more efficient.
> Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
> _______________________________________________
> PyMOL-users mailing list (PyMOL-users@lists.sourceforge.net)
> Info Page: https://lists.sourceforge.net/lists/listinfo/pymol-users
> Archives: http://www.mail-archive.com/pymol-users@lists.sourceforge.net
------------------------------------------------------------------------------
EMC VNX: the world's simplest storage, starting under $10K
The only unified storage solution that offers unified management
Up to 160% more powerful than alternatives and 25% more efficient.
Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
_______________________________________________
PyMOL-users mailing list (PyMOL-users@lists.sourceforge.net)
Info Page: https://lists.sourceforge.net/lists/listinfo/pymol-users
Archives: http://www.mail-archive.com/pymol-users@lists.sourceforge.net
