On 2/21/26 11:17 AM, Tao Tang wrote:
> Make smmuv3_cmdq_consume() security-state aware by passing sec_sid
> from smmu_writel() call sites (CR0/GERRORN/CMDQ_PROD paths), instead
> of hardcoding non-secure state. The related AddressSpace and MemTxAttrs
> are also obtained based on sec_sid.
>
> Also move CMD_SSEC legality checking to a single early check before
> command dispatch: secure commands are rejected on non-secure queues
> (including future Realm queue) with CERROR_ILL. This removes duplicated
> per-command checks in CFGI handlers.
>
> Finally, extend cmdq trace output with sec_sid so command processing
> can be correlated with the correct security bank.
>
> Signed-off-by: Tao Tang <[email protected]>
> ---
>  hw/arm/smmuv3.c     | 50 ++++++++++++++++++++++-----------------------
>  hw/arm/trace-events |  2 +-
>  2 files changed, 26 insertions(+), 26 deletions(-)
>
> diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c
> index e33a7babd1c..b2559e80f24 100644
> --- a/hw/arm/smmuv3.c
> +++ b/hw/arm/smmuv3.c
> @@ -111,14 +111,14 @@ static void smmuv3_write_gerrorn(SMMUv3State *s, 
> uint32_t new_gerrorn)
>      trace_smmuv3_write_gerrorn(toggled & pending, bank->gerrorn);
>  }
>  
> -static inline MemTxResult queue_read(SMMUQueue *q, Cmd *cmd)
> +static inline MemTxResult queue_read(SMMUQueue *q, Cmd *cmd,
> +                                     AddressSpace *as, MemTxAttrs attrs)
>  {
>      dma_addr_t addr = Q_CONS_ENTRY(q);
>      MemTxResult ret;
>      int i;
>  
> -    ret = dma_memory_read(&address_space_memory, addr, cmd, sizeof(Cmd),
> -                          MEMTXATTRS_UNSPECIFIED);
> +    ret = dma_memory_read(as, addr, cmd, sizeof(Cmd), attrs);
>      if (ret != MEMTX_OK) {
>          return ret;
>      }
> @@ -1346,14 +1346,17 @@ static void smmuv3_range_inval(SMMUState *s, Cmd 
> *cmd, SMMUStage stage,
>      }
>  }
>  
> -static int smmuv3_cmdq_consume(SMMUv3State *s, Error **errp)
> +static int smmuv3_cmdq_consume(SMMUv3State *s, Error **errp, SMMUSecSID 
> sec_sid)
>  {
>      SMMUState *bs = ARM_SMMU(s);
>      SMMUCmdError cmd_error = SMMU_CERROR_NONE;
> -    SMMUSecSID sec_sid = SMMU_SEC_SID_NS;
>      SMMUv3RegBank *bank = smmuv3_bank(s, sec_sid);
>      SMMUQueue *q = &bank->cmdq;
>      SMMUCommandType type = 0;
> +    MemTxAttrs attrs = smmu_get_txattrs(sec_sid);
> +    AddressSpace *as = smmu_get_address_space(bs, sec_sid);
> +    /* Secure AddressSpace must be available, assert if not. */
> +    g_assert(as);
pls remove that check
>  
>      if (!smmuv3_cmdq_enabled(s, sec_sid)) {
>          return 0;
> @@ -1369,18 +1372,30 @@ static int smmuv3_cmdq_consume(SMMUv3State *s, Error 
> **errp)
>          uint32_t pending = bank->gerror ^ bank->gerrorn;
>          Cmd cmd;
>  
> -        trace_smmuv3_cmdq_consume(Q_PROD(q), Q_CONS(q),
> +        trace_smmuv3_cmdq_consume(sec_sid, Q_PROD(q), Q_CONS(q),
>                                    Q_PROD_WRAP(q), Q_CONS_WRAP(q));
>  
>          if (FIELD_EX32(pending, GERROR, CMDQ_ERR)) {
>              break;
>          }
>  
> -        if (queue_read(q, &cmd) != MEMTX_OK) {
> +        if (queue_read(q, &cmd, as, attrs) != MEMTX_OK) {
>              cmd_error = SMMU_CERROR_ABT;
>              break;
>          }
>  
> +        /*
> +         * Secure Command on Non-secure Command queue, including Realm 
> Command
> +         * queue, is not allowed. CERROR_ILL will be raised according to
> +         * (IHI 0070G.b) 4.1.6 Common command fields, Page 168.
> +         */
> +        if (CMD_SSEC(&cmd)) {
> +            if (sec_sid != SMMU_SEC_SID_S) {
nit combine both checks
> +                cmd_error = SMMU_CERROR_ILL;
> +                break;
> +            }
> +        }
> +
>          type = CMD_TYPE(&cmd);
>  
>          trace_smmuv3_cmdq_opcode(smmu_cmd_string(type));
> @@ -1400,11 +1415,6 @@ static int smmuv3_cmdq_consume(SMMUv3State *s, Error 
> **errp)
>              uint32_t sid = CMD_SID(&cmd);
>              SMMUDevice *sdev = smmu_find_sdev(bs, sid);
>  
> -            if (CMD_SSEC(&cmd)) {
> -                cmd_error = SMMU_CERROR_ILL;
> -                break;
> -            }
> -
>              if (!sdev) {
>                  break;
>              }
> @@ -1424,11 +1434,6 @@ static int smmuv3_cmdq_consume(SMMUv3State *s, Error 
> **errp)
>              uint8_t range = CMD_STE_RANGE(&cmd);
>              SMMUSIDRange sid_range;
>  
> -            if (CMD_SSEC(&cmd)) {
> -                cmd_error = SMMU_CERROR_ILL;
> -                break;
> -            }
> -
>              mask = (1ULL << (range + 1)) - 1;
>              sid_range.start = sid & ~mask;
>              sid_range.end = sid_range.start + mask;
> @@ -1447,11 +1452,6 @@ static int smmuv3_cmdq_consume(SMMUv3State *s, Error 
> **errp)
>              uint32_t sid = CMD_SID(&cmd);
>              SMMUDevice *sdev = smmu_find_sdev(bs, sid);
>  
> -            if (CMD_SSEC(&cmd)) {
> -                cmd_error = SMMU_CERROR_ILL;
> -                break;
> -            }
> -
>              if (!sdev) {
>                  break;
>              }
> @@ -1666,7 +1666,7 @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr 
> offset,
>          bank->cr[0] = data;
>          bank->cr0ack = data & ~SMMU_CR0_RESERVED;
>          /* in case the command queue has been enabled */
> -        smmuv3_cmdq_consume(s, &local_err);
> +        smmuv3_cmdq_consume(s, &local_err, reg_sec_sid);
>          break;
>      case A_CR1:
>          bank->cr[1] = data;
> @@ -1683,7 +1683,7 @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr 
> offset,
>           * By acknowledging the CMDQ_ERR, SW may notify cmds can
>           * be processed again
>           */
> -        smmuv3_cmdq_consume(s, &local_err);
> +        smmuv3_cmdq_consume(s, &local_err, reg_sec_sid);
>          break;
>      case A_GERROR_IRQ_CFG0: /* 64b */
>          bank->gerror_irq_cfg0 = deposit64(bank->gerror_irq_cfg0, 0, 32, 
> data);
> @@ -1733,7 +1733,7 @@ static MemTxResult smmu_writel(SMMUv3State *s, hwaddr 
> offset,
>          break;
>      case A_CMDQ_PROD:
>          bank->cmdq.prod = data;
> -        smmuv3_cmdq_consume(s, &local_err);
> +        smmuv3_cmdq_consume(s, &local_err, reg_sec_sid);
>          break;
>      case A_CMDQ_CONS:
>          bank->cmdq.cons = data;
> diff --git a/hw/arm/trace-events b/hw/arm/trace-events
> index 4e360b3c0d3..ca8485c96af 100644
> --- a/hw/arm/trace-events
> +++ b/hw/arm/trace-events
> @@ -35,7 +35,7 @@ smmuv3_trigger_irq(int irq) "irq=%d"
>  smmuv3_write_gerror(uint32_t toggled, uint32_t gerror) "toggled=0x%x, new 
> GERROR=0x%x"
>  smmuv3_write_gerrorn(uint32_t acked, uint32_t gerrorn) "acked=0x%x, new 
> GERRORN=0x%x"
>  smmuv3_unhandled_cmd(uint32_t type) "Unhandled command type=%d"
> -smmuv3_cmdq_consume(uint32_t prod, uint32_t cons, uint8_t prod_wrap, uint8_t 
> cons_wrap) "prod=%d cons=%d prod.wrap=%d cons.wrap=%d"
> +smmuv3_cmdq_consume(int sec_sid, uint32_t prod, uint32_t cons, uint8_t 
> prod_wrap, uint8_t cons_wrap) "sec_sid=%d prod=%d cons=%d prod.wrap=%d 
> cons.wrap=%d"
>  smmuv3_cmdq_opcode(const char *opcode) "<--- %s"
>  smmuv3_cmdq_consume_out(uint32_t prod, uint32_t cons, uint8_t prod_wrap, 
> uint8_t cons_wrap) "prod:%d, cons:%d, prod_wrap:%d, cons_wrap:%d "
>  smmuv3_cmdq_consume_error(const char *cmd_name, uint8_t cmd_error) "Error on 
> %s command execution: %d"
Besides looks good to me
Reviewed-by: Eric Auger <[email protected]>

Eric


Reply via email to