Hi Eric,

On 2026/3/3 18:14, Eric Auger wrote:

On 2/21/26 11:17 AM, Tao Tang wrote:
Make smmuv3_cmdq_consume() security-state aware by passing sec_sid
from smmu_writel() call sites (CR0/GERRORN/CMDQ_PROD paths), instead
of hardcoding non-secure state. The related AddressSpace and MemTxAttrs
are also obtained based on sec_sid.

Also move CMD_SSEC legality checking to a single early check before
command dispatch: secure commands are rejected on non-secure queues
(including future Realm queue) with CERROR_ILL. This removes duplicated
per-command checks in CFGI handlers.

Finally, extend cmdq trace output with sec_sid so command processing
can be correlated with the correct security bank.

Signed-off-by: Tao Tang <[email protected]>
---
  hw/arm/smmuv3.c     | 50 ++++++++++++++++++++++-----------------------
  hw/arm/trace-events |  2 +-
  2 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c
index e33a7babd1c..b2559e80f24 100644
--- a/hw/arm/smmuv3.c
+++ b/hw/arm/smmuv3.c
@@ -111,14 +111,14 @@ static void smmuv3_write_gerrorn(SMMUv3State *s, uint32_t 
new_gerrorn)
      trace_smmuv3_write_gerrorn(toggled & pending, bank->gerrorn);
  }
-static inline MemTxResult queue_read(SMMUQueue *q, Cmd *cmd)
+static inline MemTxResult queue_read(SMMUQueue *q, Cmd *cmd,
+                                     AddressSpace *as, MemTxAttrs attrs)
  {
      dma_addr_t addr = Q_CONS_ENTRY(q);
      MemTxResult ret;
      int i;
- ret = dma_memory_read(&address_space_memory, addr, cmd, sizeof(Cmd),
-                          MEMTXATTRS_UNSPECIFIED);
+    ret = dma_memory_read(as, addr, cmd, sizeof(Cmd), attrs);
      if (ret != MEMTX_OK) {
          return ret;
      }
@@ -1346,14 +1346,17 @@ static void smmuv3_range_inval(SMMUState *s, Cmd *cmd, 
SMMUStage stage,
      }
  }
-static int smmuv3_cmdq_consume(SMMUv3State *s, Error **errp)
+static int smmuv3_cmdq_consume(SMMUv3State *s, Error **errp, SMMUSecSID 
sec_sid)
  {
      SMMUState *bs = ARM_SMMU(s);
      SMMUCmdError cmd_error = SMMU_CERROR_NONE;
-    SMMUSecSID sec_sid = SMMU_SEC_SID_NS;
      SMMUv3RegBank *bank = smmuv3_bank(s, sec_sid);
      SMMUQueue *q = &bank->cmdq;
      SMMUCommandType type = 0;
+    MemTxAttrs attrs = smmu_get_txattrs(sec_sid);
+    AddressSpace *as = smmu_get_address_space(bs, sec_sid);
+    /* Secure AddressSpace must be available, assert if not. */
+    g_assert(as);
pls remove that check


I'll remove all the unnecessary assertions and check it in lower level instead.

if (!smmuv3_cmdq_enabled(s, sec_sid)) {
          return 0;
@@ -1369,18 +1372,30 @@ static int smmuv3_cmdq_consume(SMMUv3State *s, Error 
**errp)
          uint32_t pending = bank->gerror ^ bank->gerrorn;
          Cmd cmd;
- trace_smmuv3_cmdq_consume(Q_PROD(q), Q_CONS(q),
+        trace_smmuv3_cmdq_consume(sec_sid, Q_PROD(q), Q_CONS(q),
                                    Q_PROD_WRAP(q), Q_CONS_WRAP(q));
if (FIELD_EX32(pending, GERROR, CMDQ_ERR)) {
              break;
          }
- if (queue_read(q, &cmd) != MEMTX_OK) {
+        if (queue_read(q, &cmd, as, attrs) != MEMTX_OK) {
              cmd_error = SMMU_CERROR_ABT;
              break;
          }
+ /*
+         * Secure Command on Non-secure Command queue, including Realm Command
+         * queue, is not allowed. CERROR_ILL will be raised according to
+         * (IHI 0070G.b) 4.1.6 Common command fields, Page 168.
+         */
+        if (CMD_SSEC(&cmd)) {
+            if (sec_sid != SMMU_SEC_SID_S) {
nit combine both checks


OK.

+                cmd_error = SMMU_CERROR_ILL;
+                break;
+            }
+        }
+
          type = CMD_TYPE(&cmd);
trace_smmuv3_cmdq_opcode(smmu_cmd_string(type));
------------------------------<snip>------------------------------



------------------------------<snip>------------------------------
diff --git a/hw/arm/trace-events b/hw/arm/trace-events
index 4e360b3c0d3..ca8485c96af 100644
--- a/hw/arm/trace-events
+++ b/hw/arm/trace-events
@@ -35,7 +35,7 @@ smmuv3_trigger_irq(int irq) "irq=%d"
  smmuv3_write_gerror(uint32_t toggled, uint32_t gerror) "toggled=0x%x, new 
GERROR=0x%x"
  smmuv3_write_gerrorn(uint32_t acked, uint32_t gerrorn) "acked=0x%x, new 
GERRORN=0x%x"
  smmuv3_unhandled_cmd(uint32_t type) "Unhandled command type=%d"
-smmuv3_cmdq_consume(uint32_t prod, uint32_t cons, uint8_t prod_wrap, uint8_t cons_wrap) 
"prod=%d cons=%d prod.wrap=%d cons.wrap=%d"
+smmuv3_cmdq_consume(int sec_sid, uint32_t prod, uint32_t cons, uint8_t prod_wrap, 
uint8_t cons_wrap) "sec_sid=%d prod=%d cons=%d prod.wrap=%d cons.wrap=%d"
  smmuv3_cmdq_opcode(const char *opcode) "<--- %s"
  smmuv3_cmdq_consume_out(uint32_t prod, uint32_t cons, uint8_t prod_wrap, uint8_t 
cons_wrap) "prod:%d, cons:%d, prod_wrap:%d, cons_wrap:%d "
  smmuv3_cmdq_consume_error(const char *cmd_name, uint8_t cmd_error) "Error on %s 
command execution: %d"
Besides looks good to me
Reviewed-by: Eric Auger <[email protected]>

Eric

Thanks,

Tao


Reply via email to