The QL is sitting outside the chamber... The servo controller is connected directly on the back of the QL and long leads are going from the controller to the test setup through an opening in the thermal chamber. The chamber is also purged with nitrogen.
It is "real" QL hardware, i.e. SuperGoldCard + Aurora + Minerva but in a PC case. What stand out is the 5 1/4" floppy drive and the two 3 1/2 drives :-) No I can not takes photo, but anyway a photo would have been nice if it was a standard black QL, An ugly beige box sitting next to an old thermal chamber is not as sexy. François On 2012-11-23, at 04:23, Tony Firshman <[email protected]> wrote: > Wolfgang Lenerz wrote, on 23/Nov/12 09:17 | Nov23: > >> On 23/11/2012 07:13, Francois Lanciault wrote: >> >>> . But it did work. I closed the door and set the temperature to -50degC. >> Hi, >> >> was the QL in the chamber, too, or outside and just connected through a >> serial lead? > Yes that was a mite ambiguous. It *must* have been outside I think. > > Incidentally what QL was it? I do hope it was a black box. > > > Tony > > > -- > [email protected] http://firshman.co.uk > Voice: +44(0)1442-828254 Fax: +44(0)1442-828255 Skype: tonyfirshman > TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG > _______________________________________________ > QL-Users Mailing List > http://www.q-v-d.demon.co.uk/smsqe.htm > _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
