El 11/01/2014 15:08, Adrian Ives escribió:
Sorry, Miguel. This has all been my fault. I was really too busy to
take on porting the drivers at the time, then when I tried to kick the
project off I had one hardware problem after the other. Possibly my QLs
have had a good 30 years and need to be retired. I will return the card
to
you. I assume the address is the same as on the packet?
Yes, it is.
Don't worry about the drivers. I completely understand your position :) In
fact, now that the drivers are available in source code (are they?) I can
try porting them. I haven't got much experience with 68K assembly, but
even so, if the heavy part (dealing with QDOS and the filesystem) is
already done and all that is needed is to provide a low level layer for
basic functions, I think I can deal with it :)
Anyway, thank you very much!
Good luck with this - it will be great to have a choice of two SD card
systems (three if you include using CF and SD card adaptors with Qubide)
since they all connect to the QL in different ways.
Although Adrian did not have good fortune with his projects, his work will
live on hopefully in these projects and perhaps provide a means to implement
drivers for any future new such projects. Personally, I look forward to
(perhaps) Dave developing a combined RAM/SD/FLP board for the QL expansion
slot in the future (says he trying to push Dave into such a project!)
Dilwyn
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
