Are you using Archive 2:35 or Xchange ?
2016-05-08 12:44 GMT+02:00 Renato Barigazzi <renatobariga...@tin.it>: > Hi > I am using QPC II v.4.04, I have expanded the memory to 128 MB, but with > the same result. > Best regards > Renato > > -----Messaggio originale----- From: Rich Mellor (RWAP) > Sent: Sunday, May 08, 2016 12:35 PM > To: ql-us...@q-v-d.com > Subject: Re: [Ql-Users] Archive file > > > It is rare to come across this. Do you have expanded memory on your QL > and/or a > disk drive? > > If you are loading it from microdrive cartridge, then ensure that anything > else > which uses the QL memory is disabled (such as Toolkit II and other > toolkits). > Disk interfaces also use some of the QL memory. > > If you only have a bare QL and have nothing but QL Archive running - > ensure you > are running v2.38 of Archive (the last version) as that may help. Ask > someone > else to put the database on disk for you. > > If you have it on disk, then use an emulator on a PC to set up a QL > session with > more memory, and then you will need to find some way of splitting the > database > into smaller segments, or reducing some of the data for example. > > Rich Mellor > www.rwapsoftware.co.uk > www.sellmyretro.com > > On May 8, 2016 at 11:04 AM Renato Barigazzi <renatobariga...@tin.it> >> wrote: >> >> >> Hi >> Using Psion Archive I made a _dbf file too big and now I cannot open it: >> “error 80, out of memory”. Is there any solution to open tihs file ? >> Best regards >> Renato Barigazzi >> _______________________________________________ >> QL-Users Mailing List >> > Rich Mellor > RWAP Software > www.rwapsoftware.co.uk > www.sellmyretro.com > _______________________________________________ > QL-Users Mailing List > _______________________________________________ > QL-Users Mailing List _______________________________________________ QL-Users Mailing List
