I am using Archive 2.38
-----Messaggio originale-----
From: Giorgio Garabello
Sent: Sunday, May 08, 2016 12:50 PM
To: ql-us...@q-v-d.com
Subject: Re: [Ql-Users] Archive file
Are you using Archive 2:35 or Xchange ?
2016-05-08 12:44 GMT+02:00 Renato Barigazzi <renatobariga...@tin.it>:
Hi
I am using QPC II v.4.04, I have expanded the memory to 128 MB, but with
the same result.
Best regards
Renato
-----Messaggio originale----- From: Rich Mellor (RWAP)
Sent: Sunday, May 08, 2016 12:35 PM
To: ql-us...@q-v-d.com
Subject: Re: [Ql-Users] Archive file
It is rare to come across this. Do you have expanded memory on your QL
and/or a
disk drive?
If you are loading it from microdrive cartridge, then ensure that anything
else
which uses the QL memory is disabled (such as Toolkit II and other
toolkits).
Disk interfaces also use some of the QL memory.
If you only have a bare QL and have nothing but QL Archive running -
ensure you
are running v2.38 of Archive (the last version) as that may help. Ask
someone
else to put the database on disk for you.
If you have it on disk, then use an emulator on a PC to set up a QL
session with
more memory, and then you will need to find some way of splitting the
database
into smaller segments, or reducing some of the data for example.
Rich Mellor
www.rwapsoftware.co.uk
www.sellmyretro.com
On May 8, 2016 at 11:04 AM Renato Barigazzi <renatobariga...@tin.it>
wrote:
Hi
Using Psion Archive I made a _dbf file too big and now I cannot open it:
“error 80, out of memory”. Is there any solution to open tihs file ?
Best regards
Renato Barigazzi
_______________________________________________
QL-Users Mailing List
Rich Mellor
RWAP Software
www.rwapsoftware.co.uk
www.sellmyretro.com
_______________________________________________
QL-Users Mailing List
_______________________________________________
QL-Users Mailing List
_______________________________________________
QL-Users Mailing List
_______________________________________________
QL-Users Mailing List
