Am Sun, 30 Jun 2013 21:47:36 +0200 schrieb Oliver Eichler <oliver.eich...@gmx.de>:
> usually GeoTiff is limited to 4GB. GDAL supports big tiff, but I have > never tired it. Thus I never prepared the commands for that. > > Anyway, GeoTiff might be able to support more than 4GB, JNX won't for > sure. The format uses 32bit pointers into the file. Since the GDAL conversions are done in high quality and jnx is quite compressed the source of 8GB results in a lot smaller jnx file - in this case 470 MB. > There is a help. Simply enter the command map2jnx without any > paramter. Your commandline fails because you use the -c paramter > without a value. In this case it's probably "" and QLGT's output > represents that fact badly. With -c "" it works Thanks for the quick reply! Thomas ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Qlandkartegt-users mailing list Qlandkartegt-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users