I have added those lines to tcp.smtp file and run the command "qmailctl cdb".
But since there is a problem of Perl module of SA, will it still accept emails and forward it to destination mail server? Or since SA is not working, it will reject all mails????? I hope you understand my concern..... How do I fix the perl + SA issue? -----Original Message----- From: news [mailto:n...@ger.gmane.org] On Behalf Of Eric Shubert Sent: Saturday, October 03, 2009 7:42 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] RE: Mails not being scanned / filtered by SA server You are missing: QMAILQUEUE="/var/qmail/bin/simscan",NOP0FCHECK="1" variables in the 2nd line of the tcp.smtp file. Don't forget to "qmailctl cdb" after this file is changed. You don't really need the first (127.:) line at all in this file either. That's only used for apps running on the same server that might be submitting email via port 25 without authenticating (e.g. Squirrelmail, at least the way it's presently configured on the toaster). -- -Eric 'shubes' Atul Paralikar wrote: > Steve / Eric, > > > > Here are the ouputs of the commands on our server "mail.etisbew.com" > > > > */[r...@mail ~]# rpm -V perl-Mail-DomainKeys/* > > */ /* > > */[r...@mail ~]# rpm -ql perl-Mail-DomainKeys/* > > /usr/lib/perl5/vendor_perl/5.8.8/Mail > > /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys > > /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys.pm > > /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Header.pm > > /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Key > > /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Key.pm > > /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Key/Private.pm > > /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Key/Public.pm > > /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Message.pm > > /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Policy.pm > > /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Signature.pm > > /usr/share/doc/perl-Mail-DomainKeys-1.0 > > /usr/share/doc/perl-Mail-DomainKeys-1.0/Changes > > /usr/share/doc/perl-Mail-DomainKeys-1.0/MANIFEST > > /usr/share/doc/perl-Mail-DomainKeys-1.0/META.yml > > /usr/share/doc/perl-Mail-DomainKeys-1.0/README > > /usr/share/doc/perl-Mail-DomainKeys-1.0/THANKS > > /usr/share/man/man3/Mail::DomainKeys.3pm.gz > > > > > > *[r...@mail ~]# cat /etc/tcprules.d/tcp.smtp* > > 127.:allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/%/private" > > :allow,BADMIMETYPE="",BADLOADERTYPE="M",CHKUSER_RCPTLIMIT="50",CHKUSER_WRONG RCPTLIMIT="10",DKSIGN="/var/qmail/control/domainkeys/%/private" > > > > > *[r...@mail ~]# cat /var/qmail/control/simcontrol* > > etisbew.com:clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif > > :clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif > > > > > > > > -----Original Message----- > From: news [mailto:n...@ger.gmane.org] On Behalf Of Eric Shubert > Sent: Thursday, October 01, 2009 9:07 PM > To: qmailtoaster-list@qmailtoaster.com > Subject: Re: [qmailtoaster] RE: Mails not being scanned / filtered by SA > server > > > > Steve Huff wrote: > >> > >> On Oct 1, 2009, at 10:53 AM, Atul Paralikar wrote: > >> > >> > [r...@mail qmt]#qmlog spamd > >> > > >> > 09-14 11:38:14 [8862] error: Can't locate Mail/DomainKeys/Message.pm > >> > in @INC (@INC contains: /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib64/perl5 > >> > /site_perl/5.8.8/x86_64-linux-thread-multi > >> > /usr/lib64/perl5/site_perl/5.8.7/x86_64-linux-thread-multi > >> > /usr/lib64/perl5/site_perl/5.8.6/x86_64- > >> > linux-thread-multi > >> > /usr/lib64/perl5/site_perl/5.8.5/x86_64-linux-thread-multi > >> > > >> > [r...@mail qmt]#cpan > >> > Cpan> Trying with "/usr/bin/links -source" to get > >> > ftp://ftp.perl.org/pub/CPAN/modules/03modlist.data.gz > >> > Going to read /root/.cpan/sources/modules/03modlist.data.gz > >> > Going to write /root/.cpan/Metadata > >> > Mail::DomainKeys::Message is up to date. > >> > > >> > [r...@mail qmt]# rpm -qa|grep -i domainkeys > >> > perl-Mail-DomainKeys-1.0-1.el5.rf > >> > libdomainkeys-toaster-0.68-1.3.6 > >> > > >> > Why SA is not detecting the installed plugin of DomainKeys? How to > >> > rectify this? > >> > >> this is indeed the problem; > > > > A problem, not *the* problem. I believe that there are 2 (at least) > > problems here. > > > >> until you fix this issue, SA will continue > >> to not work. > > > > True. Although fixing this problem does not mean that SA will begin > > working. ;) (simscan isn't being invoked, so neither will SA be invoked) > > > >> first things first, don't install Perl modules from CPAN on a > >> RPM-managed system; you will assuredly break things at some point or > >> another, and the problem will be difficult to fix. > > > > Good advice, in general. > > > >> i can see that you have the perl-Mail-DomainKeys package from rpmforge > >> installed; this is good. please post the output of the following two > >> commands: > >> > >> $ rpm -V perl-Mail-DomainKeys > >> $ rpm -ql perl-Mail-DomainKeys > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys.pm > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Header.pm > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Key > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Key.pm > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Key/Private.pm > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Key/Public.pm > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Message.pm > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Policy.pm > >> /usr/lib/perl5/vendor_perl/5.8.8/Mail/DomainKeys/Signature.pm > >> /usr/share/doc/perl-Mail-DomainKeys-1.0 > >> /usr/share/doc/perl-Mail-DomainKeys-1.0/Changes > >> /usr/share/doc/perl-Mail-DomainKeys-1.0/MANIFEST > >> /usr/share/doc/perl-Mail-DomainKeys-1.0/META.yml > >> /usr/share/doc/perl-Mail-DomainKeys-1.0/README > >> /usr/share/doc/perl-Mail-DomainKeys-1.0/THANKS > >> /usr/share/man/man3/Mail::DomainKeys.3pm.gz > >> > >> `rpm -V` should give you no output at all; `rpm -qf` should give you the > >> output as shown above. if you get anything different, then your > >> installed package has been corrupted (perhaps by using CPAN to do a > >> manual install); the fix is to remove perl-Mail-DomainKeys (`sudo rpm -e > >> --nodeps perl-Mail-DomainKeys`) and reinstall it (`sudo yum install > >> perl-Mail-DomainKeys`). > > > > That's certainly worth a shot. > > > > -- > > -Eric 'shubes' > ---------------------------------------------------------------------------- ----- Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! ---------------------------------------------------------------------------- ----- Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com --------------------------------------------------------------------------------- Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! --------------------------------------------------------------------------------- Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
