Greg, This product might work for you. http://www.rubbercal.com/Corrugated_Ramp_Cleat.html
Ramp Cleat is a unique rubber flooring product. Unlike other ribbed flooring goods, the Ramp Cleat's ribs run widthwise, which improves floor traction, especially for inclines or ramps. The Ramp Cleat is appropriate for areas that have inclement weather conditions, like rain and snow, for long periods. This product increases the safety of your customers and lowers possible liability exposure at a reasonable cost. The Ramp Cleat is considered a temporary floor cover, hence, it can be removed seasonally. This rolled rubber mat can be bought in any length up to 50 feet! It is highly recommended for incline, outdoor walkways, boat docks, and commercial ramps. They will send samples. Derrick ----- Original Message ----- From: Derrick To: Greg Cc: quad-list@eskimo.com Sent: Wednesday, November 30, 2011 12:04 PM Subject: Re: [QUAD-L] icy ramps Greg, I put safety tape on my wooden deck. http://www.kofflersales.com/anti-slip-tape.asp?cid=23 It is to cold to install now. It must be 50 degrees, I think. I throw sand on ice since it does not harm wood but can get in house. Derrick ----- Original Message ----- From: Greg To: quad-list@eskimo.com Sent: Wednesday, November 30, 2011 9:21 AM Subject: [QUAD-L] icy ramps Hi all, I have a rather long, wood-decking ramp leading into the house that freezes over quickly whenever there is moisture in the air and the temperature drops to freezing, sort of like the bridges freezing over first on the roads. You don't even notice the ice until you step on it so it is particularly dangerous to visitors. This ramp also serves as the main entrance into our home so everyone who visits uses the ramp. There are handrails on both sides for the length of the ramp, but it is still treacherous when iced over. Do any of you know of something I can do to the ramp to make it less hazardous? Salt doesn't help much, and when we do use it I fear my mother will slip and fall (again) while applying it. I'm thinking maybe adding some type of raised strip (low profile) every foot or so, but what material should I use? Will this even help? Any ideas on how to solve this problem? Thanks in advance. Greg c5 Lebanon, TN
