VERY LIKELY…….never have had it checked, no one at the dealer ever mentioned it either. I suppose it would be accessed by removing the panel on the bottom of the ramp cover under van??
From: Danny Hearn [mailto:ddh...@sbcglobal.net] Sent: Wednesday, February 11, 2015 5:36 PM To: wheelch...@aol.com; zoocr...@windstream.net; quad-list@eskimo.com Subject: Re: [QUAD-L] Ramp Problems Sometimes lifts act up when low on hydraulic fluid.....may have that checked if you have not yet. Dan*** On Wednesday, February 11, 2015 4:28 PM, "wheelch...@aol.com" <wheelch...@aol.com> wrote: Bearing Headquarters. They have locations all over North American. I'm hoping that you are looking at the side of the bearings to obtain the number for replacement. Best Wishes -----Original Message----- From: nichole rohling <zoocr...@windstream.net> To: quad-list <quad-list@eskimo.com> Sent: Wed, Feb 11, 2015 4:08 pm Subject: [QUAD-L] Ramp Problems If I win the Oklahoma powerball tonight I won’t need this answered but since that probably isn’t going to happen……….. I have a 2002 Dodge Grand Caravan IMS Rampvan 1. my ramp isn’t coming all the way out and isn’t pulling all the way back in (probably 1” to 1 ½” off)……..any ideas? 2. I need to replace 5 roller bearings that are under the ramp and wonder if I can buy somewhere…..they are a about 7/8” long, roller/bearing is just over ½” in diameter and have CRS – 8 O2R 10RR on them I have pictures of the roller bearings if any of you think you can help me then I can email them to you Thanks Nicki C5/6