The reason for original Quantum not having the frames galvanised was due to cost. I have Been advised that they had to be competitive with the rest of the kit car world. One way that I like to protect, and have done so now to quite a few cars is :- shot blast, zinc plate (cold process no distortion) etch prime and then polyurethane paint. Yes it's darn expensive. In fact zinc plating all the metalwork on a coupe costs around £450 ! Then add paint on top. But it will last over 20 years with no further attention. The reason for the 2+2 having a metal frame at the front, was to save labour costs in making the shell. It is very costly to make a full shell in GRP and as you are all aware, the front end of the coupe is a complicated affair. It saves much Time to weld up some square tubing and reduce laminating duties. However it does mean that a front end collision costs a lot to replace the front, so I would recommend that 2+2 owners really take up the agreed value option for your insurance that our club has got for us. At least it should give us enough room on costings to get a new front end made and sprayed. Another reason that Quantum did not protect the metalwork further, is that they really did not expect us to still be driving these cars at this age. A lot of the cars that I deal with are now touching 20 years old. Lets be fair it's amazing that our cars have been so good we still enjoy them now, most production cars would never get this far. Now lets get our cars to do another 20 years, with the help that we get from our committee and the insurance companies, I really do hope that this happens as I would hate to only have a production car and not a Quantum. It just would not seam right. Eddie
-- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.