John,
The Zetec uses the same or later versions on the cvh gearbox (BC) and the Zetec engine itself is a revision of the cvh. Therefore the original driveshafts will be OK, assuming you have XR2 ones.

If engine electrics are not your thing, these could be a problem, but in reality they are very simple by modern car standards.

Ideally you want everything from the same donor vehicle, including loom and ECU, that way the components are fully matched.

Take a look at Jim Here's site, quantums.info as this has most of the information you are likely to need.

Regards,
Steve
www.h4-turbo.co.uk
www.quantumowners.co.uk



On 31 July 2015 22:49:57 john beckett <jabeckett2...@gmail.com> wrote:

Hello,
I am looking to do a zebec conversion on my 2+2 i can do the adjustments to the front frame but I would like to know if anyone has or know where I could get the parts to do this job like the drive shafts or what I do concerning the front suspension.

If anyone on here has done a Zetec conversion on here are there any major issues that I should be aware of.

Thank you

--
--
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
---
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
You received this message because you are subscribed to the Google Groups "Quantum 
Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor 
the individuals associated with the Quantum Owners Club or in the preparation of the 
above information shall have any liability to any person or entity with respect to 
liability, loss, or damage caused or alleged to be caused directly or indirectly by the 
instructions contained within this or related message(s).
--- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to