Martin
I hear what you are saying about the Quadrant, I want to ensure no easy fixes are left untried. Unfortunately it is too late to make more checks as the engine/gearbox are out again. However I can confirm he clutch pedal was going to the floor. Actually I was hitting the Fiberglass bulkhead as I removed all the carpet and sound deadening from behind the pedal just to eliminate that concern. My other thought is the gearbox has two holes for the clutch cable to pass through. I am starting to wonder if I can use the other hole which means tha cable will pull on the release arm nearer to the shaft so I get more degrees of turn for a given movement of the clutch pedal. I know this will lead to a heavier clutch pedal, I need to find something that will work. This would need a different, shorter, arm of some sort of mod to the existing one. While the gear linkage UJ is a little stiff. I had no problem selecting gears before taking the engine out and I can select gears easily when the engine isn’t running. So definitely the clutch is dragging even when the clutch pedal is fully depressed. Chris From: quantumowners@googlegroups.com [mailto:quantumowners@googlegroups.com] On Behalf Of Susan and Martin Scott Sent: 06 September 2018 13:37 To: quantumowners@googlegroups.com Subject: Re: [Quantum Owners] Re: Help needed with a 2+2 clutch problem Hmm - Your thought that the thrust bearing may have been pressing (when it shouldn't) sounds correct. The movement of the cable will only be 10% more with the 55mm quadrant - Is it possible to check how much cable is pulled when the clutch is fully depressed, in order to get an idea whether the arm will nearly reach the limit (ie hit casing)? Does the pedal hit the floor, or could the arm move more if the pedal was able to move more (ie bigger quadrant will help by 10%) if that makes sense. Just trying to get an idea of the full picture....... All knowledge gained before tackling the job is probably worthwhile. I went round in circles with replacing quadrant/cable until I realised the issue must be the clutch (also had the gearchange linkage in bits, and although that wasn't the root of the problem it was too tight) Martin ----- Original Message ----- From: 'Chris Fairlie' via Quantum Owners Group <mailto:quantumowners@googlegroups.com> To: quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> Sent: Thursday, September 06, 2018 1:16 PM Subject: RE: [Quantum Owners] Re: Help needed with a 2+2 clutch problem Marin No slack at the gearbox or pedal end when depressing the clutch Chris From: quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> [mailto:quantumowners@googlegroups.com] On Behalf Of Susan and Martin Scott Sent: 05 September 2018 22:09 To: quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> Subject: Re: [Quantum Owners] Re: Help needed with a 2+2 clutch problem Hi Chris, If I recall correctly the Escort quadrant is the 55mm black one. With an observer, is it possible to see if the arm starts moving when the pedal is depressed, or if there is a delay indicating slack being taken up. Could also 'twang' the cable at the arm to guage if there is any slack. Martin ----- Original Message ----- From: 'Chris Fairlie' via Quantum Owners Group <mailto:quantumowners@googlegroups.com> To: quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> Sent: Wednesday, September 05, 2018 8:57 PM Subject: RE: [Quantum Owners] Re: Help needed with a 2+2 clutch problem Dave The car already had an escort quadrant fitted. Martin I refitted the pedal box and fully depressed the clutch. The is still quite a bit of travel on the release arm. So looks like there is an issue with the adjuster and or cable. Regards Chris From: quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> [mailto:quantumowners@googlegroups.com] On Behalf Of Dave English Sent: 04 September 2018 18:11 To: Quantum Owners Group <quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> > Subject: [Quantum Owners] Re: Help needed with a 2+2 clutch problem Hi Chris I had a similar problem for years, the clutch bite point being too low. My fix was to modify the white quadrant to increase the radius to the cable and increase the amount the cable moved. Eventually I fitted a quadrant from a Mk3 Escort (81-86), Ford part number 78GB7L583AC. This was coloured black (I don't think that means much). This had a larger radius and solved the problem. The bite point is still on the low side but doesn't create an issue. Regards Dave English Q2-009 -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com <mailto:quantumowners-unsubscr...@googlegroups.com> For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com <mailto:quantumowners+unsubscr...@googlegroups.com> . For more options, visit https://groups.google.com/d/optout. _____ <https://www.avg.com/internet-security> This email has been checked for viruses by AVG antivirus software. www.avg.com <https://www.avg.com/internet-security> -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com <mailto:quantumowners-unsubscr...@googlegroups.com> For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com <mailto:quantumowners+unsubscr...@googlegroups.com> . For more options, visit https://groups.google.com/d/optout. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com <mailto:quantumowners-unsubscr...@googlegroups.com> For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com <mailto:quantumowners+unsubscr...@googlegroups.com> . For more options, visit https://groups.google.com/d/optout. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com <mailto:quantumowners-unsubscr...@googlegroups.com> For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com <mailto:quantumowners+unsubscr...@googlegroups.com> . For more options, visit https://groups.google.com/d/optout. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com <mailto:quantumowners@googlegroups.com> To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com <mailto:quantumowners-unsubscr...@googlegroups.com> For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com <mailto:quantumowners+unsubscr...@googlegroups.com> . For more options, visit https://groups.google.com/d/optout. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.