Good evening everyone, wouldn’t you just know it, six months of inactivity then when I want to run the Q it starts to act up. I set off from home and within 400m it cut out, the fuel pump not running, the fuses etc were ok, so I changed the fuel pump relay for a known good spare, still nothing, when I could finally find the access cover to the tank I found there was no power at the plug, I checked and tested what I could then ran a fly lead from power , cut into the supply wire at the plug on the tank, connected the fly lead and the pump ran. Does anyone know where, if fitted the inertia cut off would be fitted before I splice in a new supply, stoneleigh isn’t far away. Many thanks. Bill
Sent from my iPhone -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
