The QSC recommended rear cylinder size seemed to change a few times. You did not mention if you have G valve in rear circuit. If you were not suffering with rear wheel locking then probably best to just replace existing cylinders with same (size is usually marked on cylinder). I do not have G valve on my saloon and rears are 15mm.
John On Saturday, 10 September 2022 at 11:07:03 UTC+1 Hans wrote: > Dear All > > What is the recomended rear brake cylinder size for a QSC saloon Q113? > 17,5 or 20mm > > Hans > > > > > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/9ba4c189-33df-44f3-9e7d-8a47599cf95bn%40googlegroups.com.
