Now very off-topic --
and a bit unfair but it's what we want our macs to do as well ;)
http://www.sonybiz.net/biz/view/ShowProduct.action?product=AWS-
G500HD&site=biz_en_EU&pageType=Overview&imageType=Main&category=Anycast
it runs linux
On 14-apr-2008, at 20:51, Moheb Milad wrote:
Hi Paul
I must agree that the speed bus is not the bottleneck here BUT:
1. In an old email from the support of Varasoftware , they assured
me that their application can handle 3 to 4 iSight "PER FW PORT"
2. Connecting the FW port of my DVCAM to a G5 conflicted with a 1TB
FW 800 LaCie drive while it did not conflict with earlier laCie
models on FW 400.
3. Connecting several DV boxes (Analog to DV Video converters)
never worked with me when it's from the same manufacturer.
4. Connecting 2 DV boxes from two different manufacturer worked for
me on any application.
5. Up to 2 BMD Capturing cards can now be recognized by applications.
6. A third capture card could added & recognized by the
applications provided that it's from a different manufacturer.
7. Any multiple card setup must be installed on the actual computer
(Expansion chassis do not work in such cases).
Yes I've been trying to build a multichannel ingest system on a
single computer for a couple of years now.
Best
Moheb
On Apr 14, 2008, at 10:11 PM, Paul Rutten wrote:
On 14-apr-2008, at 18:26, Michael Diehr wrote:
Slightly off-topic -- anyone have experience getting 2 or more DV
sources over firewire at the same time (e.g. a canopus advc 110
and 55 at the same time?) DV requires roughly 25mbps bandwidth
per stream, so in theory FW at 400mbps should be able to handle
multiple streams, but who knows? Assuming one could work around
the DV driver issue, what's a realistic # of DV streams on a
typical mac on FW400? thx!
Hi Michael,
I have this experience with two iSight cams: Both hooked up to the
firewire bus of my PowerBook G4 (10.4.11): forget it. It seems as
if they're in each others way.
Only one of them gives an image, and the "Show Device Settings..."
button in Quartz Composer is inresponsive.
However if I hook them up both to a Lacie PCMCIA to firewire
cardbus adapter it works partially.
One is in full quality and the other is kinda pixellated. What I
also notice is that the one with less quality gives a slightly
higher image than the other when connected to a billboard.
Normally I use one of them on the cardbus adapter and the other on
the laptop's own port. Then both images are of same quality and
height
I get the idea there is a one DV stream device limit on a firewire
bus.
They show up named iSight and iSight#2 every time regardless of
how I connect them. Compression on both is set to component video
and I can enable the highest quality checkbox in QC with no
apparent change in video quality.
Below is a partial copy-paste from the system profiler FireWire
List wich shows they're identical in respect to firmware.
The sum in activity of Windowserver and QC rev up my cpu to
approx. 60% with the QC viewer window fullscreen.
So maybe giving your mac an additional firewire port via an
adaptor card can solve your problem.
Now what I'd like to know form Apple if someone is reading: Is
this the normal behaviour I'm experiencing.
You're right Michael, a DV stream should do 25mbps but apparently
bus speed not the bottleneck.
Paul
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
iSight:
Manufacturer: Apple Computer, Inc.
Model: 0x8
GUID: 0xA2700040E6F36
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
iSight Unit:
Unit Software Version: 0x102
Unit Spec ID: 0xA02D
iSight Unit:
Unit Software Version: 0x10
Unit Spec ID: 0xA27
iSight Unit:
Unit Software Version: 0x11
Unit Spec ID: 0xA27
iSight Unit:
Unit Software Version: 0x12
Unit Spec ID: 0xA27
Product Revision Level: 1.0.3
iSight:
Manufacturer: Apple Computer, Inc.
Model: 0x8
GUID: 0xA27000402FB79
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
iSight Unit:
Unit Software Version: 0x102
Unit Spec ID: 0xA02D
iSight Unit:
Unit Software Version: 0x10
Unit Spec ID: 0xA27
iSight Unit:
Unit Software Version: 0x11
Unit Spec ID: 0xA27
iSight Unit:
Unit Software Version: 0x12
Unit Spec ID: 0xA27
Product Revision Level: 1.0.3
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Quartzcomposer-dev mailing list (Quartzcomposer-
[EMAIL PROTECTED])
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/quartzcomposer-dev/moheb%
40emirates.net.ae
This email sent to [EMAIL PROTECTED]
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Quartzcomposer-dev mailing list ([email protected])
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/quartzcomposer-dev/archive%40mail-archive.com
This email sent to [EMAIL PROTECTED]
