On 17/12/16 01:42 PM, Reg Tiangha wrote: > On 12/17/2016 11:47 AM, Foppe de Haan wrote: >> On Saturday, December 17, 2016 at 7:40:25 PM UTC+1, Reg Tiangha wrote: >>> On 12/17/2016 10:36 AM, Foppe de Haan wrote: >>>> I also built the fedora kernel according to Reg's recipe, same issue. >>>> Comparing boot logs, the problem seems to start here: >>>> >>>> [ 0.765662] BUG: unable to handle kernel paging request at >>>> ffff87ff95a17300 >>>> [ 0.765671] IP: [<ffffffff81316cb9>] delay_mwaitx+0x49/0x90 >>>> [ 0.765682] PGD 0 >>>> [ 0.765688] Oops: 0000 [#1] SMP >>>> [ 0.765693] Modules linked in: >>>> [ 0.765701] CPU: 0 PID: 1 Comm: swapper/0 Not tainted >>>> 4.8.13-coldkernel-grsec-1 #1 >>>> [ 0.765709] task: ffff8800136bf540 task.stack: ffffc90000e38000 >>>> [ 0.765714] RIP: e030:[<ffffffff81316cb9>] [<ffffffff81316cb9>] >>>> delay_mwaitx+0x49/0x90 >>>> [ 0.765724] RSP: e02b:ffffc90000e3be50 EFLAGS: 00010087 >>>> [ 0.765729] RAX: ffff87ff95a17300 RBX: 0000000000000001 RCX: >>>> 0000000000000000 >>>> [ 0.765735] RDX: 0000000000000000 RSI: 00039262adda8fdb RDI: >>>> 000000000002a4e4 >>>> [ 0.765740] RBP: ffffffff81c17300 R08: 00000000ffffffff R09: >>>> 0000000000000000 >>>> [ 0.765745] R10: 0000000000000002 R11: 000000000000000f R12: >>>> 0000000000000200 >>>> [ 0.765749] R13: ffffc90000e3bea7 R14: ffffffff824055e8 R15: >>>> 607e4ce58fa6249c >>>> [ 0.765758] FS: 0000000000000000(0000) GS:ffff880013e00000(0000) >>>> knlGS:0000000000000000 >>>> [ 0.765765] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 >>>> [ 0.765770] CR2: ffff87ff95a17300 CR3: 00000000020c2000 CR4: >>>> 0000000000040660 >>>> [ 0.765775] Stack: >>>> [ 0.765779] 0000000000000001 00000000000010d1 ffffffff814956a5 >>>> 95fa1589597478a1 >>>> [ 0.765788] ffffffff814960d0 95fa1589597478a1 ffffc90000e3bec8 >>>> 06937a89d974aa7d >>>> [ 0.765797] 00000000ffffffed ffffffff8236af42 df7e4ce58fa6249c >>>> 0000000000000000 >>>> [ 0.765807] Call Trace: >>>> [ 0.765815] [<ffffffff814956a5>] ? i8042_wait_write+0x25/0x70 >>>> [ 0.765822] [<ffffffff814960d0>] ? i8042_command+0x30/0x80 >>>> [ 0.765829] [<ffffffff8236af42>] ? i8042_init+0x606/0x6f8 >>>> [ 0.765835] [<ffffffff8236a93c>] ? i8042_probe+0xa41/0xa41 >>>> [ 0.765842] [<ffffffff8100219d>] ? do_one_initcall+0x4d/0x170 >>>> [ 0.765849] [<ffffffff822f3f0d>] ? kernel_init_freeable+0x202/0x2ff >>>> [ 0.765856] [<ffffffff81623f65>] ? kernel_init+0x5/0x118 >>>> [ 0.765861] [<ffffffff8163c6fe>] ? ret_from_fork+0x1e/0x40 >>>> [ 0.765867] [<ffffffff81623f60>] ? rest_init+0x88/0x88 >>>> [ 0.765871] Code: 41 b8 ff ff ff ff 48 09 c6 41 ba 02 00 00 00 eb 09 48 >>>> 29 c6 48 01 f7 48 89 c6 48 89 e8 65 48 03 05 25 25 cf 7e 4c 89 c9 4c 89 ca >>>> <0f> 01 fa 4c 39 c7 4c 89 c3 4c 89 d8 48 0f 46 df 4c 89 d1 0f 01 >>>> [ 0.765920] RIP [<ffffffff81316cb9>] delay_mwaitx+0x49/0x90 >>>> [ 0.765927] RSP <ffffc90000e3be50> >>>> [ 0.765931] CR2: ffff87ff95a17300 >>>> [ 0.765939] ---[ end trace 84bc057c0ef01aab ]--- >>>> [ 0.765946] Kernel panic - not syncing: grsec: halting the system due >>>> to suspicious kernel crash caused by root >>>> >>>> (Same error in both VMs.) >>>> >>> Did you try passing along the "nopat" kernel option through grub to see >>> if that made a difference? >> Yes, but it didn't make a difference. >> > > Does it work when the VM has the entire compile environment? As in, if > you follow the coldhak instructions directly, does it work? Or does it > never work? > > > Hi everyone,
Please be aware that there are a number of issues with using coldkernel in the Fedora templates currently. Our goal is to push out 0.9b over the holidays to address this. For the time being, the Fedora instructions have been entirely removed from the master git branch, and progress will be made on the 0.9b branch, along with Whonix support. Happy Holidays! -- Colin Childs Coldhak https://coldhak.ca Twitter: @coldhakca -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/e004ad67-8d69-f4fb-a040-5927e9157172%40riseup.net. For more options, visit https://groups.google.com/d/optout.