used a working desktop to install and update to qubes-unstable. this time the lemur was able to boot, but sys-net could not run. heres an hcl-report followed by a typescript session showing pci devices and the error. adding pci devices to sys-net in the qubes-manager gave the same result.
---
layout:
'hcl'
type:
'notebook'
hvm:
'yes'
iommu:
'yes'
slat:
'yes'
tpm:
'unknown'
brand: |
System76, Inc
model: |
Lemur
bios: |
5.12
cpu: |
Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz
cpu-short: |
FIXME
chipset: |
Intel Corporation Device [8086:5904] (rev 02)
chipset-short: |
FIXME
gpu: |
Intel Corporation Device [8086:5916] (rev 02) (prog-if 00 [VGA controller])
gpu-short: |
FIXME
network: |
Intel Corporation Wireless 8260 (rev 3a)
Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit
Ethernet Controller (rev 12)
memory: |
32655
scsi: |
Samsung SSD 850 Rev: 1B6Q
CT750MX300SSD1 Rev: 0100
versions:
- works:
'FIXME:yes|no|partial'
qubes: |
R3.2
xen: |
4.6.3
kernel: |
4.8.12-12
remark: |
FIXME
credit: |
FIXAUTHOR
link: |
FIXLINK
---
Script started on Mon 02 Jan 2017 09:33:34 PM PST
]0;user@dom0:~ [user@dom0 ~]$ lspci
00:00.0 Host bridge: Intel Corporation Device 5904 (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Device 5916 (rev 02)
00:08.0 System peripheral: Intel Corporation Skylake Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI
Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP
Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI
#1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller
[AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Device 9d10 (rev f1)
00:1c.2 PCI bridge: Intel Corporation Device 9d12 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6
(rev f1)
00:1f.0 ISA bridge: Intel Corporation Device 9d58 (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
02:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI
Express Card Reader (rev 01)
03:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411
PCI Express Gigabit Ethernet Controller (rev 12)
]0;user@dom0:~ [user@dom0 ~]$ qvm-start sys-net
--> Creating volatile image: /var/lib/qubes/servicevms/sys-net/volatile.img...
--> Loading the VM (type = NetVM)...
Traceback (most recent call last):
File "/usr/bin/qvm-start", line 136, in <module>
main()
File "/usr/bin/qvm-start", line 120, in main
xid = vm.start(verbose=options.verbose,
preparing_dvm=options.preparing_dvm, start_guid=not options.noguid,
notify_function=tray_notify_generic if options.tray else None)
File "/usr/lib64/python2.7/site-packages/qubes/modules/005QubesNetVm.py",
line 122, in start
xid=super(QubesNetVm, self).start(**kwargs)
File "/usr/lib64/python2.7/site-packages/qubes/modules/000QubesVm.py", line
1966, in start
self.libvirt_domain.createWithFlags(libvirt.VIR_DOMAIN_START_PAUSED)
File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1059, in
createWithFlags
if ret == -1: raise libvirtError ('virDomainCreateWithFlags() failed',
dom=self)
libvirt.libvirtError: internal error: Unable to reset PCI device 0000:03:00.1:
internal error: Active 0000:03:00.0 devices on bus with 0000:03:00.1, not doing
bus reset
]0;user@dom0:~ [user@dom0 ~]$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
]0;user@dom0:~ [user@dom0 ~]$ ip l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
]0;user@dom0:~ [user@dom0 ~]$ exit
exit
Script done on Mon 02 Jan 2017 09:34:09 PM PST
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/ca885a11-4f1c-43ff-b1a0-ec15f631ea17%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Qubes-HCL-System76__Inc________________________-Lemur-20170102-213650.yml
Description: Binary data
typescript.lemur7
Description: Binary data
