W dniu środa, 16 sierpnia 2017 21:16:11 UTC+2 użytkownik Sven Semmler napisał: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > Hi, > > I am new to Qubes OS and this group. Attached please find a PDF > outlining how I organized my setup in general. Getting right to the > point, here is what I have done so far: > > * setup and using all fedora-23 based qubes / qubes-split-gpg ... all > works fine and as expected > > * created Windows 7 HVM template [1] > > * created USB qube [2] and verified that USB pass-through works using > the "dev" fedora-23 AppVM. Many of the hardware tools I use have Linux > clients [3][4][5] > > My issue: > > * other hardware tools I need to use have only Windows clients [6][7][8] > > * it is my impression that the qubes-windows-tools do not (yet) support > USB pass-through - is that correct? > > * I have also tried to assign the entire USB controller to the Windows > HVM but have failed. I can repeat and provide error messages if that > would be a valid approach. > > My next steps: > > * install VirtualBox [9] in a dedicated fedora-23 based AppVM > > * run Windows 7 as a guest in VirtualBox inside the fedora-23 qube > > I know that: > > 1) USB pass-through into fedora-23 AppVM works > 2) I have used a Windows VBox on Linux installs before (non Qubes OS) > 3) USB pass-through from Linux to the VBox worked too > > So I see no reason other than performance that the above wouldn't work. > > The purpose of this email is: > > * confirm that qubes-windows-tools do not support USB pass-through and I > have not overlooked anything or made a mistake along the way > > * evaluate whether assigning the entire USB controller to the HVM is a > viable solution ... some seem to have had success with that, but I > couldn't find much details on how to do it other than the obvious tab > in the Qubes VM Manager details for the respective qube. > > * get feedback regarding my setup in general (attachment) ... does this > make sense? > > * get feedback if anyone else is using the Windows VBox in fedora AppVM > approach to enable USB pass-through > > Thank you for taking the time to read this. I am looking forward to any > feedback you are willing to share. > > /Sven > > [1] > https://www.qubes-os.org/doc/windows-appvms/#using-template-based-window > s-appvms-qubes-r2-beta-3-and-later > [2] https://www.qubes-os.org/doc/usb/ > [3] https://www.totalphase.com/products/beagle-i2cspi/ > [4] https://www.saleae.com/originallogic16 > [5] > https://www.microchip.com/Developmenttools/ProductDetails.aspx?PartNO=DV > 244005 > [6] https://www.k2l.de/products/42/OptoLyzer%C2%AE%20MOCCA%20compact/ > [7] https://www.k2l.de/products/15/MediaLB%C2%AE%20Analyzer/ > [8] https://www.k2l.de/products/16/INIC%20Explorer/ > [9] https://www.virtualbox.org/ > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v2 > > iQIcBAEBCAAGBQJZlJn1AAoJENpuFnuPVB+2qj4P/2FIG65UyErGMeX7JlVWh63s > fZBoSMH0hWenEY96UCGNvqYjIoqYPD68NczXjzOypWzW8/1vjbgKkgRPSglb83/N > X4iUU54gCnShiNSMTpqxBRpA/vXA/ynT6uPX2HnytK/4poEgA2w0VH8Xm2PfUVkn > WOUHd5QvoFMMczAQY8yu0eM6klI2SwqWo6kMBmXljfak43Mx/WWRgBuEqdZsOMwY > P1/ei7Yj98o+VONKO5IwQg9O7GcpCJB8EladQhTXA5/xt/VdjUdao+j8vX0Lr1Ld > wT8aD/SSmZuO4DwGV1goUy0eUdsvrwsc9Os0zlUysF4Z28bqyMdseJKNPmYj8Ntj > 8skDgCD45BTczURwD63DTtbHC+akOBA1G/T2cIQJOIm2Y1iE3vxWQssZOS8MDJ6F > MM4jmjVqLX5oWQxm5VEw5Noajx/Vg0bFPfxfj1HVXidhf9ntaVBV2lS4TUkgCWQc > ICqwXfjxoj88O94sCFxoZCMrBS3lE+SEXtAJqkRNxeUGfIO+knSy5oaxKUrEQCQh > g6QDc4AaYLYvYvou4hLktWvwTNeeUmzSZGCu5NX3JKuEncVFDBh0KNdjuZGJ9WXG > CuW96jgdYvBSbPVrg30kKR3d1YlLCPm8vSvI4FwknclrrVhSBYL2kcInvBJW3aM0 > 9vqcQKtJgd/O8HTDCWZR > =dVhj > -----END PGP SIGNATURE-----
99% one of two things happened. 1. VT-d is not enabled on your machine. In this case go to bios and enable it. 2. USB controller does not support function level reset. In this case use following command: qvm-prefs -s windowsvm pci_strictreset false and reboot your windows vm -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/fe861c9d-6141-497e-8ae5-160a0c630b1b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
