Hello All, I see, thanks a lot guys for your help, but I'd like to solve my last doubt that is about the output of serial cable that come of SPECTRACOM(2). My doubt if is possible to have 2 hardwares using the same channel or serial cable? On the output of this cable there is one adapter that convert the serial port db9 to 2 x db25. I tried to use before the 2 hardwares using these 2 x db25, but I havent successfull. Is it possible? I dont know if explain right, but anyway I can explain again in another way.
Thanks a lot, Marcos Luiz Onisto On 1 Mar 2007 14:23:30 GMT, Ronan Flood <[EMAIL PROTECTED]> wrote: > [EMAIL PROTECTED] (Marcos Onisto) wrote: > > > I dont understand the output of this command , but follow below: > > > > # /usr/local/bin/ntpdate -qd 127.0.0.1 > > 28 Feb 14:37:12 ntpdate[1081]: ntpdate [EMAIL PROTECTED] Thu Apr 1 > > 03:24:08 EST 2004 (1) > > Looking for host 127.0.0.1 and service ntp > > host found : localhost > > transmit(127.0.0.1) > > receive(127.0.0.1) > > transmit(127.0.0.1) > > receive(127.0.0.1) > > transmit(127.0.0.1) > > receive(127.0.0.1) > > transmit(127.0.0.1) > > receive(127.0.0.1) > > transmit(127.0.0.1) > > server 127.0.0.1, port 123 > > stratum 1, precision -20, leap 00, trust 000 > > refid [WWVB], delay 0.02580, dispersion 0.00002 > > transmitted 4, in filter 4 > > reference time: c9903c22.a8a70d71 Wed, Feb 28 2007 14:36:34.658 > > originate timestamp: c9903c48.4aab241b Wed, Feb 28 2007 14:37:12.291 > > transmit timestamp: c9903c48.4a9c6e1b Wed, Feb 28 2007 14:37:12.291 > > filter delay: 0.02621 0.02586 0.02580 0.02580 > > 0.00000 0.00000 0.00000 0.00000 > > filter offset: 0.000186 0.000036 0.000009 0.000010 > > 0.000000 0.000000 0.000000 0.000000 > > delay 0.02580, dispersion 0.00002 > > offset 0.000009 > > > > 28 Feb 14:37:12 ntpdate[1081]: adjust time server 127.0.0.1 offset 0.000009 > > sec > > It worked! Transmitted 4 queries, received 4 replies, reported offset > of 9 microseconds; which is about as expected as the server is querying > its own system clock. That's what you wanted to see, isn't it? > > > # netstat -an | grep 123 > > *.123 Idle > > *.123 Idle > > 127.0.0.1.123 Idle > > 10.0.0.2.123 Idle > > 192.168.64.69.123 Idle > > *.123 Idle > > > > Everything is all right? What's is wrong? > > Looks like your server is not listening on the IPv6 local address ::1, > which is what your "ntpdate -q localhost" said it was trying before > > > > > # /usr/local/bin/ntpdate -q localhost > > > > Looking for host localhost and service ntp > > > > host found : localhost > > > > server ::1, stratum 0, offset 0.000000, delay 0.00000 > > and that's why that did not work. > > What operating system are you using? Perhaps you have some problem with > the definition of localhost in /etc/hosts (or maybe /etc/inet/ipnodes) ? > Or some IPv6 configuration problem? > > Your ntpdate says "version [EMAIL PROTECTED]", what is your ntpd version, > shown by "ntpq -crv" ? > > -- > Ronan Flood <[EMAIL PROTECTED]> > > _______________________________________________ > questions mailing list > [email protected] > https://lists.ntp.isc.org/mailman/listinfo/questions > _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
