On Fri, 2 Mar 2007 16:56:50 GMT, [EMAIL PROTECTED] (Marcos Onisto) wrote: > > What does "ntpq -ccl" show on your working server? > > $ ntpq -ccl > status=0303 clk_fault, last_clk_fault > device="Spectracom WWVB/GPS Receivers", > timecode=" 07 061 16:50:46.001 S", poll=5348, noreply=0, badformat=0, > baddata=90, fudgetime1=0.000, stratum=0, refid=WWVB, flags=0
The timecode is Spectracom format 2. I note by the way that refclock_wwvb also supports the Netclock/GPS, so possibly this *is* a GPS rather than WWVB clock -- I don't know if you would be able to receive WWVB in Brazil, actually ... > > I asked you before what "ls -l /dev/wwvb2" shows ... > > $ ls -l /dev/wwv* > lrwxrwxrwx 1 root other 49 Jul 4 2006 /dev/wwvb1 -> > ../devices/[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL > PROTECTED],3803f8:a > lrwxrwxrwx 1 root other 49 Jul 3 2006 /dev/wwvb2 -> > ../devices/[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL > PROTECTED],3602f8:b Uh, I don't know what that means, I expected a link to /dev/term/b or /dev/cua/b rather than the raw device, but if it works OK. I think that's as far as I get; you need to find out exactly what you're connecting to and what the various cables are doing. There are PDF manuals for various Spectracom clocks available on the net if they might help. -- Ronan Flood <[EMAIL PROTECTED]> _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
