[EMAIL PROTECTED] (Marcos Onisto) wrote: > That's it!
OK. > In front of the Spectracom hardware there are information like below: > DIGITAL CLOCK DISTRIBUTOR > LOCAL PRIMARY REFERENCE > DCD - LPR/C > GTI/C - GPS That sounds like a telco SSU (eg Symmetricom) rather than a Spectracom clock, although I know nothing about either as it happens! I suppose since refclock_wwvb is happy it doesn't matter. What does "ntpq -ccl" show on your working server? > I have two servers Sun Netra T1 with Solaris 9 Operation System like They have an RJ45 serial port, so you're converting from DB25 to that? I asked you before what "ls -l /dev/wwvb2" shows ... > below, but only one is connected now because I had a problem before. I > dont know It because the two servers disputing the same channel or if > there is a problem. I guess it could be an electrical problem rather than a software problem; I don't know if two servers trying to poll the clock would interfere with each other. However I'd say a clock distributor would be sending the time at regular intervals without polling. -- Ronan Flood <[EMAIL PROTECTED]> _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
