Thanks for the information. I was curious about the new position
averaging mode, but I'll wait until this is resolved.
1.0s offset is horrible, that will certainly break gpsd or any
application that pairs pulses with following NMEA timestamps.
Have you tried increasing baud rate to 38400 and disabling all
unneeded NMEA sentences?
--
Miroslav Lichvar
Miroslav,
From reports elsewhere, it seems that the position averaging mode adds
about 8ms to the delay. You can enable and disable the mode with the
Garmin configuration software.
NTP seems to work correctly with the - agreed horrible - 1.0s offset.
That is with 19200 baud and just the single GPRMC sentence. (I think
that's the one). So changing to 38400 baud wouldn't get me a lot (about
17ms earlier).
Cheers,
David
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
