Hello Again, Okay, everyone has said I definitely need to use a custom kernel, and I have now done that, and ntpdc -c kern now reports the following:
pll offset: -1.091e-06 s pll frequency: -3.196 ppm maximum error: 0.019912 s estimated error: 1e-06 s status: 2107 pll ppsfreq ppstime ppssignal nano pll time constant: 7 precision: 1e-09 s frequency tolerance: 496 ppm pps frequency: -3.196 ppm pps stability: 0.022 ppm pps jitter: 1.261e-06 s calibration interval: 128 s calibration cycles: 797 jitter exceeded: 522 stability exceeded: 0 calibration errors: 5 Which looks fairly reasonable, as the status line is talking about ppstime and ppssignal. Not sure about 5 calibration errors... But then I look at ntpq -p and it says this: remote refid st t when poll reach delay offset jitter ============================================================================== +server1.terrybu 158.43.192.66 2 u 70 128 377 6.356 -0.122 13.187 -82.113.154.206 193.62.22.82 2 u 70 128 377 5.441 -0.582 13.929 +gamma.h3x.no 195.234.155.123 3 u 1 128 377 6.066 -0.228 0.660 *GPS_NMEA(0) .PPS. 0 l 2 64 377 0.000 -0.001 0.001 I'm fairly sure that there should be a lower case "o" to the left of GPS_NMEA, and there is not. Am I right to be worried? Thanks again! Paul.-- This message (and any attachments) is for the recipient only. NERC is subject to the Freedom of Information Act 2000 and the contents of this email and any reply you make may be disclosed by NERC unless it is exempt from release under the Act. Any material supplied to NERC may be stored in an electronic records management system. _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions