Hi, First off, I'm not sure if this topic has come up before. If there is a website or an archived post somewhere that will help me with this problem, please let me know.
I was going to make an instrument list for my Yamaha psr-s700 keyboard, because there are a lot of front panel patches which I do not use and want to start using. I would use the keyboard's sequencer but as we know, QWS is much more easier to use. I looked in the keyboard's manual and could not find a reference anywhere of bank and patch numbers. So I decided if I started from a standard piano on the keyboard, and start recording in qws, and switch to a patch I want to add to my list, it will record the controller changes the keyboard sends out. Then I can go in the event list, copy bank and program changes, and add them to the instrument list. So I tried it, and sure enough I got all the controllers, but there is one problem. I don't have a clue how to figure out what to put in the instrument list for bank number. Here is the bank and program for the mega clean guitar. Bank sel 1 0 8 Bank sel 1 32 0 Program 1 3 I'm almost sure that I need to enter 3 as my program number, but what about the bank? Can someone tell me how to translate the events above to the numbers I would use when making the instrument list? Thanks.
