Make sure you go into properties and set volume, pan, reverb, chorus etc. Otherwise the midi synth will use whatever volume was last used for that channel, since it has not been given an additional volume controler. So if you load a midi file with channel 2 at low volume, and then load one of your own tracks with a channel 2 that doesn't have a set volume level, it will still play at that lower volume. -1 indicates an empty parameter, and will not actually send any volume controlers to the synth. So anything from 0 to 127 is good, 0 being complete silence.
Simon ----- Original Message ----- From: Doug Leavens To: QWS list Sent: Sunday, December 13, 2009 5:16 PM Subject: QWS List Final problem (I think). After creating a track, setting velocity and stuff, it played okay. When I later reloaded the file, that track was way down in the background. Resetting velocity to 127 did no good! Unfortunately it's a lead track. How can I fix this, or will I have to crank down the velocity of all other tracks in the project? Thanks much in advance. Growing old is mandatory, growing up is optional!
