Already did that!!
I guess I'll just have to re-record the track.
Thanks anyhooooo!
----- Original Message -----
From: Simon Jaeger, Laptop Edition
To: QWS list
Sent: Sunday, December 13, 2009 7:28 PM
Subject: Re: QWS List Final problem (I think).
Make sure you go into properties and set volume, pan, reverb, chorus etc.
Otherwise the midi synth will use whatever volume was last used for that
channel, since it has not been given an additional volume controler. So if you
load a midi file with channel 2 at low volume, and then load one of your own
tracks with a channel 2 that doesn't have a set volume level, it will still
play at that lower volume. -1 indicates an empty parameter, and will not
actually send any volume controlers to the synth. So anything from 0 to 127 is
good, 0 being complete silence.
Simon
----- Original Message -----
From: Doug Leavens
To: QWS list
Sent: Sunday, December 13, 2009 5:16 PM
Subject: QWS List Final problem (I think).
After creating a track, setting velocity and stuff, it played okay.
When I later reloaded the file, that track was way down in the background.
Resetting velocity to 127 did no good!
Unfortunately it's a lead track. How can I fix this, or will I have to
crank down the velocity of all other tracks in the project?
Thanks much in advance.
Growing old is mandatory, growing up is optional!
