Jerome, It seems like the request did not reach the server, or the server dropped the request. We have similar problems at one point with Windows 2000 when using the Windows 2000 built-in client with Cisco 350. It turned out we needed zero configuration, Service pack 3 and 802.11b authentication patch on the client side. We have not tried Funk Odyssey. But if our environment setup infor may be useful to you, you may want to check out:
http://bonnet2.geol.qc.edu/wireless/wirelessEap-2.htm which is our How-To for PEAP auth in our environment. Good luck! Bon On Thu, 19 Jun 2003, Jerome Fleury wrote: > Here is the test config: > > Client: Cisco Aironet/Orinoco > 802.1X client: 2000+hotfix/Funk Odyssey > AP: Cisco Aironet 1100 > > I use the test config from goodies/eap_peap.cfg with this modification: > > Filename %D/users-wifi > > (is there any special entry to put in this file ? anonymous user ?) > > As soon as I enter my credentials (802.1X identification window from Windows 2000 > appears), the > radius request launches from the AP: > > .Jun 19 13:42:01.250: dot11_dot1x_run_rfsm: current state CLIENT_WAIT, received > CLIENT_REPLY, > mac: 0060.1df0.3503 > .Jun 19 13:42:01.250: dot11_dot1x_send_response_to_server: Sending client data to > server > .Jun 19 13:42:01.251: RADIUS/ENCODE(00003489): acct_session_id: 13473 > .Jun 19 13:42:01.251: RADIUS(00003489): sending > .Jun 19 13:42:01.252: RADIUS: Send to unknown id 44 172.30.19.3:1812, > Access-Request, len 128 > .Jun 19 13:42:01.252: RADIUS: authenticator 52 44 49 1C E4 86 B3 78 - E9 F8 87 6C > B1 59 CA FF > .Jun 19 13:42:01.252: RADIUS: User-Name [1] 5 "ben" > .Jun 19 13:42:01.252: RADIUS: Framed-MTU [12] 6 1400 > > .Jun 19 13:42:01.252: RADIUS: Called-Station-Id [30] 16 "0002.8a5b.400f" > .Jun 19 13:42:01.252: RADIUS: Calling-Station-Id [31] 16 "0060.1df0.3503" > .Jun 19 13:42:01.252: RADIUS: NAS-Port-Type [61] 6 802.11 wireless > [19] > .Jun 19 13:42:01.252: RADIUS: Message-Authenticato[80] 18 * > .Jun 19 13:42:01.252: RADIUS: EAP-Message [79] 8 > .Jun 19 13:42:01.253: RADIUS: 02 03 00 06 > [????] > .Jun 19 13:42:01.253: RADIUS: NAS-Port-Type [61] 6 Virtual > [5] > .Jun 19 13:42:01.253: RADIUS: NAS-Port [5] 6 159 > > .Jun 19 13:42:01.253: RADIUS: Service-Type [6] 6 Login > [1] > .Jun 19 13:42:01.254: RADIUS: NAS-IP-Address [4] 6 172.30.24.10 > > .Jun 19 13:42:01.254: RADIUS: Nas-Identifier [32] 9 "ap2.gre" > .Jun 19 13:42:06.253: RADIUS: Retransmit to (172.30.19.3:1812,1813) for id 44 > .Jun 19 13:42:12.056: RADIUS: Retransmit to (172.30.19.3:1812,1813) for id 44 > .Jun 19 13:42:17.057: RADIUS: Retransmit to (172.30.19.3:1812,1813) for id 44 > .Jun 19 13:42:21.899: dot11_dot1x_parse_client_pak: Received EAPOL packet from > 0060.1df0.3503 > .Jun 19 13:42:21.899: EAPOL pak dump rx > .Jun 19 13:42:21.899: EAPOL Version: 0x1 type: 0x1 length: 0x0000 > 00E126C0: 01010000 .... > .Jun 19 13:42:21.899: dot11_dot1x_run_rfsm: current state SERVER_WAIT, received > EAP_START, mac: > 0060.1df0.3503 > .Jun 19 13:42:21.900: dot11_dot1x_ignore_event: Ignore event: do nothing > .Jun 19 13:42:22.188: RADIUS: Tried all servers. > .Jun 19 13:42:22.188: RADIUS: No valid server found. Trying any viable server > .Jun 19 13:42:22.188: RADIUS: Tried all servers. > .Jun 19 13:42:22.188: RADIUS: No response from (172.30.19.3:1812,1813) for id 44 > .Jun 19 13:42:22.188: RADIUS/DECODE: parse response no app start; FAIL > .Jun 19 13:42:22.188: RADIUS/DECODE: parse response; FAIL > > > As you can see, the Radius server seems not to respond, and AP retransmits. > > Here are the logs on Radiator: > > Code: Access-Request > Identifier: 44 > Authentic: RDI<28><228><134><179>x<233><248><135>l<177>Y<202><255> > Attributes: > User-Name = "ben" > Framed-MTU = 1400 > Called-Station-Id = "0002.8a5b.400f" > Calling-Station-Id = "0060.1df0.3503" > NAS-Port-Type = 19 > Signature = "<14><184>;<197>Q<12>;<219>Y5<209><240><179>%<181><184>" > EAP-Message = "<2><3><0><6><25>" > NAS-Port-Type = Virtual > NAS-Port = 159 > Service-Type = Login-User > NAS-IP-Address = 172.30.24.10 > NAS-Identifier = "ap2.gre" > > Thu Jun 19 15:42:17 2003: DEBUG: Handling request with Handler '' > Thu Jun 19 15:42:17 2003: DEBUG: Deleting session for ben, 172.30.24.10, 159 > Thu Jun 19 15:42:17 2003: DEBUG: Handling with Radius::AuthFILE: > Thu Jun 19 15:42:17 2003: DEBUG: Handling with EAP: code 2, 3, 6 > Thu Jun 19 15:42:17 2003: DEBUG: Response type 25 > > and that's pretty all. No error to help me out. > > Has anybody any clue about that ? > > Thanks. > -- > Jerome Fleury > === > Archive at http://www.open.com.au/archives/radiator/ > Announcements on [EMAIL PROTECTED] > To unsubscribe, email '[EMAIL PROTECTED]' with > 'unsubscribe radiator' in the body of the message. > === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
