Here is the test config: Client: Cisco Aironet/Orinoco 802.1X client: 2000+hotfix/Funk Odyssey AP: Cisco Aironet 1100
I use the test config from goodies/eap_peap.cfg with this modification: Filename %D/users-wifi (is there any special entry to put in this file ? anonymous user ?) As soon as I enter my credentials (802.1X identification window from Windows 2000 appears), the radius request launches from the AP: .Jun 19 13:42:01.250: dot11_dot1x_run_rfsm: current state CLIENT_WAIT, received CLIENT_REPLY, mac: 0060.1df0.3503 .Jun 19 13:42:01.250: dot11_dot1x_send_response_to_server: Sending client data to server .Jun 19 13:42:01.251: RADIUS/ENCODE(00003489): acct_session_id: 13473 .Jun 19 13:42:01.251: RADIUS(00003489): sending .Jun 19 13:42:01.252: RADIUS: Send to unknown id 44 172.30.19.3:1812, Access-Request, len 128 .Jun 19 13:42:01.252: RADIUS: authenticator 52 44 49 1C E4 86 B3 78 - E9 F8 87 6C B1 59 CA FF .Jun 19 13:42:01.252: RADIUS: User-Name [1] 5 "ben" .Jun 19 13:42:01.252: RADIUS: Framed-MTU [12] 6 1400 .Jun 19 13:42:01.252: RADIUS: Called-Station-Id [30] 16 "0002.8a5b.400f" .Jun 19 13:42:01.252: RADIUS: Calling-Station-Id [31] 16 "0060.1df0.3503" .Jun 19 13:42:01.252: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19] .Jun 19 13:42:01.252: RADIUS: Message-Authenticato[80] 18 * .Jun 19 13:42:01.252: RADIUS: EAP-Message [79] 8 .Jun 19 13:42:01.253: RADIUS: 02 03 00 06 [????] .Jun 19 13:42:01.253: RADIUS: NAS-Port-Type [61] 6 Virtual [5] .Jun 19 13:42:01.253: RADIUS: NAS-Port [5] 6 159 .Jun 19 13:42:01.253: RADIUS: Service-Type [6] 6 Login [1] .Jun 19 13:42:01.254: RADIUS: NAS-IP-Address [4] 6 172.30.24.10 .Jun 19 13:42:01.254: RADIUS: Nas-Identifier [32] 9 "ap2.gre" .Jun 19 13:42:06.253: RADIUS: Retransmit to (172.30.19.3:1812,1813) for id 44 .Jun 19 13:42:12.056: RADIUS: Retransmit to (172.30.19.3:1812,1813) for id 44 .Jun 19 13:42:17.057: RADIUS: Retransmit to (172.30.19.3:1812,1813) for id 44 .Jun 19 13:42:21.899: dot11_dot1x_parse_client_pak: Received EAPOL packet from 0060.1df0.3503 .Jun 19 13:42:21.899: EAPOL pak dump rx .Jun 19 13:42:21.899: EAPOL Version: 0x1 type: 0x1 length: 0x0000 00E126C0: 01010000 .... .Jun 19 13:42:21.899: dot11_dot1x_run_rfsm: current state SERVER_WAIT, received EAP_START, mac: 0060.1df0.3503 .Jun 19 13:42:21.900: dot11_dot1x_ignore_event: Ignore event: do nothing .Jun 19 13:42:22.188: RADIUS: Tried all servers. .Jun 19 13:42:22.188: RADIUS: No valid server found. Trying any viable server .Jun 19 13:42:22.188: RADIUS: Tried all servers. .Jun 19 13:42:22.188: RADIUS: No response from (172.30.19.3:1812,1813) for id 44 .Jun 19 13:42:22.188: RADIUS/DECODE: parse response no app start; FAIL .Jun 19 13:42:22.188: RADIUS/DECODE: parse response; FAIL As you can see, the Radius server seems not to respond, and AP retransmits. Here are the logs on Radiator: Code: Access-Request Identifier: 44 Authentic: RDI<28><228><134><179>x<233><248><135>l<177>Y<202><255> Attributes: User-Name = "ben" Framed-MTU = 1400 Called-Station-Id = "0002.8a5b.400f" Calling-Station-Id = "0060.1df0.3503" NAS-Port-Type = 19 Signature = "<14><184>;<197>Q<12>;<219>Y5<209><240><179>%<181><184>" EAP-Message = "<2><3><0><6><25>" NAS-Port-Type = Virtual NAS-Port = 159 Service-Type = Login-User NAS-IP-Address = 172.30.24.10 NAS-Identifier = "ap2.gre" Thu Jun 19 15:42:17 2003: DEBUG: Handling request with Handler '' Thu Jun 19 15:42:17 2003: DEBUG: Deleting session for ben, 172.30.24.10, 159 Thu Jun 19 15:42:17 2003: DEBUG: Handling with Radius::AuthFILE: Thu Jun 19 15:42:17 2003: DEBUG: Handling with EAP: code 2, 3, 6 Thu Jun 19 15:42:17 2003: DEBUG: Response type 25 and that's pretty all. No error to help me out. Has anybody any clue about that ? Thanks. -- Jerome Fleury === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.