Salut Jerome -
It looks like Radiator is crashing if the log stops as shown. You will need to look at the Perl output to see what the error is, but it is usually a missing module that has not been loaded. The easiest way to see what is happening is to run radiusd from the command line like this:
perl radiusd -foreground -log_stdout -trace 4 -config_file .....
where "...." is the name of your configuration file.
Note the list of prerequisite modules that are listed in the comment block at the top of the "eap_peap.cfg" file.
regards
Hugh
On Thursday, Jun 19, 2003, at 23:49 Australia/Melbourne, Jerome Fleury wrote:
Here is the test config:
Client: Cisco Aironet/Orinoco 802.1X client: 2000+hotfix/Funk Odyssey AP: Cisco Aironet 1100
I use the test config from goodies/eap_peap.cfg with this modification:
Filename %D/users-wifi
(is there any special entry to put in this file ? anonymous user ?)
As soon as I enter my credentials (802.1X identification window from Windows 2000 appears), the
radius request launches from the AP:
.Jun 19 13:42:01.250: dot11_dot1x_run_rfsm: current state CLIENT_WAIT, received CLIENT_REPLY,
mac: 0060.1df0.3503
.Jun 19 13:42:01.250: dot11_dot1x_send_response_to_server: Sending client data to server
.Jun 19 13:42:01.251: RADIUS/ENCODE(00003489): acct_session_id: 13473
.Jun 19 13:42:01.251: RADIUS(00003489): sending
.Jun 19 13:42:01.252: RADIUS: Send to unknown id 44 172.30.19.3:1812, Access-Request, len 128
.Jun 19 13:42:01.252: RADIUS: authenticator 52 44 49 1C E4 86 B3 78 - E9 F8 87 6C B1 59 CA FF
.Jun 19 13:42:01.252: RADIUS: User-Name [1] 5 "ben"
.Jun 19 13:42:01.252: RADIUS: Framed-MTU [12] 6 1400
.Jun 19 13:42:01.252: RADIUS: Called-Station-Id [30] 16 "0002.8a5b.400f"
.Jun 19 13:42:01.252: RADIUS: Calling-Station-Id [31] 16 "0060.1df0.3503"
.Jun 19 13:42:01.252: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]
.Jun 19 13:42:01.252: RADIUS: Message-Authenticato[80] 18 *
.Jun 19 13:42:01.252: RADIUS: EAP-Message [79] 8
.Jun 19 13:42:01.253: RADIUS: 02 03 00 06 [????]
.Jun 19 13:42:01.253: RADIUS: NAS-Port-Type [61] 6 Virtual [5]
.Jun 19 13:42:01.253: RADIUS: NAS-Port [5] 6 159
.Jun 19 13:42:01.253: RADIUS: Service-Type [6] 6 Login [1]
.Jun 19 13:42:01.254: RADIUS: NAS-IP-Address [4] 6 172.30.24.10
.Jun 19 13:42:01.254: RADIUS: Nas-Identifier [32] 9 "ap2.gre"
.Jun 19 13:42:06.253: RADIUS: Retransmit to (172.30.19.3:1812,1813) for id 44
.Jun 19 13:42:12.056: RADIUS: Retransmit to (172.30.19.3:1812,1813) for id 44
.Jun 19 13:42:17.057: RADIUS: Retransmit to (172.30.19.3:1812,1813) for id 44
.Jun 19 13:42:21.899: dot11_dot1x_parse_client_pak: Received EAPOL packet from 0060.1df0.3503
.Jun 19 13:42:21.899: EAPOL pak dump rx
.Jun 19 13:42:21.899: EAPOL Version: 0x1 type: 0x1 length: 0x0000
00E126C0: 01010000 ....
.Jun 19 13:42:21.899: dot11_dot1x_run_rfsm: current state SERVER_WAIT, received EAP_START, mac:
0060.1df0.3503
.Jun 19 13:42:21.900: dot11_dot1x_ignore_event: Ignore event: do nothing
.Jun 19 13:42:22.188: RADIUS: Tried all servers.
.Jun 19 13:42:22.188: RADIUS: No valid server found. Trying any viable server
.Jun 19 13:42:22.188: RADIUS: Tried all servers.
.Jun 19 13:42:22.188: RADIUS: No response from (172.30.19.3:1812,1813) for id 44
.Jun 19 13:42:22.188: RADIUS/DECODE: parse response no app start; FAIL
.Jun 19 13:42:22.188: RADIUS/DECODE: parse response; FAIL
As you can see, the Radius server seems not to respond, and AP retransmits.
Here are the logs on Radiator:
Code: Access-Request
Identifier: 44
Authentic: RDI<28><228><134><179>x<233><248><135>l<177>Y<202><255>
Attributes:
User-Name = "ben"
Framed-MTU = 1400
Called-Station-Id = "0002.8a5b.400f"
Calling-Station-Id = "0060.1df0.3503"
NAS-Port-Type = 19
Signature = "<14><184>;<197>Q<12>;<219>Y5<209><240><179>%<181><184>"
EAP-Message = "<2><3><0><6><25>"
NAS-Port-Type = Virtual
NAS-Port = 159
Service-Type = Login-User
NAS-IP-Address = 172.30.24.10
NAS-Identifier = "ap2.gre"
Thu Jun 19 15:42:17 2003: DEBUG: Handling request with Handler ''
Thu Jun 19 15:42:17 2003: DEBUG: Deleting session for ben, 172.30.24.10, 159
Thu Jun 19 15:42:17 2003: DEBUG: Handling with Radius::AuthFILE:
Thu Jun 19 15:42:17 2003: DEBUG: Handling with EAP: code 2, 3, 6
Thu Jun 19 15:42:17 2003: DEBUG: Response type 25
and that's pretty all. No error to help me out.
Has anybody any clue about that ?
Thanks. -- Jerome Fleury === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening?
-- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence.
=== Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
