It shouldn't be all *that *hard to create a small L-shaped fitting that 
screws to the lower eyelets and provides upper eyelets *and* replacement 
lowers.  It would take about 1.5" sq inches of sheet metal, max, a saw, and 
a drill.  You could also make it out of aluminum and thread it it.  Lots of 
options.  Granted, they're all kind of hackish, but then so are band-on 
front derailers.  ;-)

On Wednesday, July 9, 2014 10:38:56 AM UTC-4, Bill Lindsay wrote:
>
> For sure the HAR will connect to the lower eyelets.  It just won't be 
> level, most likely.  Not being level won't cause any problem besides 
> looking tilted.  
>
> On Tuesday, July 8, 2014 9:08:24 PM UTC-7, john muhl wrote:
>>
>> Both my Atlantis and Betty Foy have double eyelets but I did call before 
>> ordering and was told (can’t remember who at RBW answered) that mounting 
>> them to the lower eyelets (on my Saluki) should work just fine. They’re due 
>> to arrive on the 10th so I’ll find out for sure then.
>>
>>
>> On Tue, Jul 8, 2014 at 1:07 PM, Bill Lindsay <tape...@gmail.com> wrote:
>>
>>> The Hub Area Rack fits best on an eyelet above the fork tip and on 
>>> mid-fork braze ons.  Will it fit your bike? 
>>>
>>> Most current Riv models have fork tips with double eyelets.  If you buy 
>>> a brand new A Homer Hilsen, Hunqapillar, Cheviut, Hillborne, or Atlantis, 
>>> you are going to get double eyelet fork tips.  If you buy a Roadeo or a San 
>>> Marcos, you'll get single eyelets.  
>>>
>>> I have a Hub Area Rack, have had it for a while.  It was an early 
>>> prototype that I talked them into letting me buy.  For what it's worth, I 
>>> paid a fair bit more for mine that you guys are paying now, but I share 
>>> that as a reason for you to be happy, not as a reason for me to be sad. 
>>>  Anyhow, now that there are bags for it, I've pulled it back out.  Only now 
>>> do I realize that my old (2009) Hillborne does not have the upper eyelets 
>>> and my old (2010) Hilsen also doesn't have them.  Only my Bombadil and my 
>>> Gunnar doublespeed has upper eyelets and mid fork braze ons.  I wish I 
>>> could snap my fingers and have upper eyelets appear on my Hilsen and my 
>>> Hillborne so I could run this rack on those bikes as well.  Oh well.  
>>>
>>> Anyhow, as a workaround, it looks like it would be possible to run the 
>>> HAR on the lower eyelets, but it might have a tilt to it.  Not the end of 
>>> the world but not ideal.  
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "RBW Owners Bunch" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to rbw-owners-bun...@googlegroups.com.
>>> To post to this group, send email to rbw-owne...@googlegroups.com.
>>> Visit this group at http://groups.google.com/group/rbw-owners-bunch.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at http://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Reply via email to