That, my friend, is slick!

IF you lived in my neighborhood I would learn a lot from you.

Gotta find a bolt supplier like that in Nashville,

Edwin

On Thursday, May 12, 2016 at 6:26:08 AM UTC-5, Ron Mc wrote:
>
> Hi Kevin, 
> I used the diving board mount hole on the rack (and kept it functional).  
> Most important part here is a really good height measurement.  
> I replaced the diving board M5 with a longer M5 pan-head that reaches Just 
> under the fender (of course hole to clear M5 in fender).  
> Beneath the fender is a star lock washer and half-nut.  
> Above the fender is a leather washer, flat washer, star washer and 
> half-nut.  
> Below the diving board is a split lock washer and half nut.  
> Have to tighten all this with a pair of 8mm box-end wrenches.  
> It couldn't be more solid.  
>
> IMy office is near the airport, and the bolt supplier is 2 blocks away 
>  I've rigged kayaks and built bikes from there for years. Show up with a 
> list, and they fill your short order up to a handful of fasteners for $3, 
> which goes into the coffee fund.  Any size made (except maybe M7), any 
> style, they should have it.  
> Regards
>
> On Thursday, May 12, 2016 at 4:22:42 AM UTC-5, Kevin Lindsey wrote:
>>
>> Ron -
>> That's a pretty neat trick.  How did you do that?
>> Kevin
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Reply via email to