Hi Andrew, Can you elaborate on what's uncomfortable for you on the 56 Sam?
I agree with Benz that some measurement is off. I'm 170cm (5'7"), PBH 81cm and ride SH a few mm under 70cm. I ride a 56 AHH, which has just a wee bit clearance for pelvic bone, and 48 Hunqapillar. The Hunqapillar is sized down-- providing a little more stand-over clearance in the woods and a lower head tube to get the bars lower. Could probably use a less tall stem to get them down a little more. I've found that the bikes are quite different with different handle bars. I really like the AHH with albatross. The Hunqapillar with albatross was ok-- but probably too close. Drops work fine on both bikes, but the position of the tops and hoods feels very different (with same stem). Good luck, shoji On Saturday, July 2, 2016 at 11:54:29 PM UTC-4, Benz, Sunnyvale, CA wrote: > > Something is off. I have a PBH of 81.0 cm and am 5'10" tall (yeah, short > legs; Grant measured PBH twice). My saddle height is between 70 and 70.5 > cm, and this range is essentially what a few different calculators > (including Riv's) recommend. You either measured a parameter differently > from norm, you use super-long cranks, or your saddle height is way too low. > > On Saturday, July 2, 2016 at 9:37:14 AM UTC-7, Andrew Huston wrote: >> >> Yes. My PBH is 84. I wear a 30 inseam in pants. Saddle height measured in >> my MB6 and Jonesis 70cm. I'm gauging that my saddle height may indicate >> longer torso than legs, 5'10" btw. I'm not sure if this all adds up but >> I've measured multiple times and this is what I get. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
