Tom, I think most of us would say this is a beautiful build, but it's also quintessentially Pudge :)
I love the wood rims, but don't need a show bike so those actually scare me to death! You should get a little more interest if you separate it out. On Tuesday, May 2, 2017 at 2:19:50 PM UTC-4, Pudge wrote: > > OK, sound of crickets since I posted this suggests either (a) the bike is > of no interest to list members as built, or (b) the price is way too high. > > As to the former -- functionally, this bike is like a nearly new, > super-fancy step through Quickbeam. It's not for mountainous areas, true, > but single speeds are FUN in appropriate areas. It's a great bike. > > As to the latter problem, PLEASE feel free to make offers, including > aggressive offers or offers for less than the complete build -- I'd love to > find a list member who would give this bike the use it deserves. > > > > Sent from my iPhone > > On Apr 30, 2017, at 4:23 PM, Allingham II, Thomas J. (Retired Partner) < > thomas.a...@skadden.com <javascript:>> wrote: > > *Warning: Long email, but the subject line and next paragraph basically > say it all.* > > > > OK, folks, the time has come once again to cull some bikes. First up is my > essentially new 59 cm Hunter Green Rivendell Wilbury. Here's a pic: > https://flic.kr/p/H2Zb8R There are many others, including a lot of > detail images, in this album: > > https://flickr.com/photos/37542512@N04/sets/72157631845152497 > <https://www.google.com/url?q=https%3A%2F%2Fflickr.com%2Fphotos%2F37542512%40N04%2Fsets%2F72157631845152497&sa=D&sntz=1&usg=AFQjCNHIonLWn4HAiwNI_NCDkEi8H7UgfA> > > > I would prefer to sell this as a complete bike, and to provide some > incentive, I've set the asking price pretty low, compared to the actual and > replacement cost of the gorgeous frame and beautiful (and unusual, in some > cases unique) components. I'm biased, of course, but I think any buyer who > appreciates this kind of bike will be thrilled with this unique example. > > I bought the frame/fork new from College Park Bicycles in Maryland -- it > was in the owner's private stash. As list members know, a frame like this > can now only be obtained by ordering a custom from Rivendell, at about > $3,500 for the frameset alone. This build has about 10 miles on it -- no > dings or scratches on the frame that I can find anywhere. > > > > I built this bike up from scratch. It is an unusual, even quirky, build > -- a single speed drive train, with hand-built wheels using Italian wooden > rims. I intentionally set out to make this bike as pretty as I could, with > much attention to every detail, but don't be deceived -- it is supremely > comfortable, and great fun to jump on and ride. Here is a full parts > list. Except as noted, all parts are NOS. > > > > Frame/fork/headset > > Rivendell Wilbury 59cm > > Bottom bracket > > Shimano > > Wheelset > > Front hub > > Peter Weigle-modified vintage Campagnolo > > Front rim > > Ghisallo Wooden > > 36 hole > > Spokes > > Wheelsmith > > Rear hub > > White Industries ENO Eccentric > > Rear rim > > Ghisallo Wooden > > 36 hole > > Rear spokes > > Wheelsmith > > Tires > > Grand Bois Hetres > > Red > > Freewheel > > White Industries ENO > > Chain > > Wipperman stainless > > Crankset > > Peter Weigle-modified vintage Stronglight (I think it's a 49D?) > > Pedals > > MKS rubber block, w/ red rubber blocks subbed in to match the Hetres > > Seatpost > > Nitto Lugged Post > > Saddle > > Brooks B-17 Special (hand-hammered copper rivets) > > Stem > > Nitto Lugged Stem > > Handlebars > > Nitto Albatross > > Grips > > Rivendell Cork, shellacked > > Brake levers > > Tektro vintage-style > > Brakes > > VO Grand Cru centerpulls > > Straddle cable hangers > > Herse-style from Compass Cycles > > Front bag > > Tubular custom plaid bag from Eric Hjeltness > > Rear bag > > Lunch-bag style plaid bag from Eric Hjeltness > > > > Also included is a beautiful leather wrapped thermos flask from Beg > Bicycles in the UK, which fits the Nitto bottle cage perfectly, and matches > the saddle. > > > Some pertinent measurements: > > > > Seat tube 60cm > > Virtual top tube 59cm > > Saddle height as pictured 78cm > > Reach (rear of saddle to rear ends of grips) 70cm > > > > I have a PBH of around 87cm, and it fits me like a glove. Moreover, since > it's a mixte, the fit is flexible, as standover is not an issue. > > > > I have just about $4,600 invested in this bike, which is essentially brand > new. Replacement cost would be an additional $1,700, so around $5,300. > I'm asking $3,200. I'll consider delivery anywhere in the Middle Atlantic > states, so if you're willing to meet me halfway, no need to ship within a > radius of at least 400 miles of Delaware. Otherwise, actual shipping > cost paid by buyer. > > > > Hit me up if you have any questions. I'm probably going to be posting > some other bikes in the next couple of weeks, too. > > > > Thanks for considering. > > > > Tom Allingham (Pudge, to the list!) > > > > > ------------------------------ > > > The sender of this email is a retired partner of Skadden, Arps, Slate, > Meagher & Flom LLP ("Skadden") and is not performing legal service on > behalf of Skadden. Use by a retired partner of the skadden.com or > probonolaw.com domain names is in his/her personal capacity and not on > behalf of Skadden or its affiliates. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
