My picture didn't seem to come through. Here's the link: https://flic.kr/p/UVECZ6
Tim On Thu, May 18, 2017 at 9:32 AM, Tim Butterfield <timbutterfi...@gmail.com> wrote: > On my Homer, I have the light on the left and run the wire up and through > the Mark's rack and down the other side. > From the light, the wire goes > up to and over the front of the left rear support > down and under the left edge of the rack > diagonally through the rack to the front of the right rear support > up and over the right rear support > down and through a zip tie just above the fork rack mount > down the fork and through another zip tie at the bottom of the fork > and then into the dyno connection > > I haven't used it enough to know whether it is a good setup or not. > > Tim > > > > On Thu, May 18, 2017 at 7:33 AM, Carla Waugh <lhtbikert...@gmail.com> > wrote: > >> If you have a dyno hub on the front wheel and a small Nitto front rack on >> your Sam can you please post a pic with the wiring showing? If you love >> your setup let me know which hub and light you used. Thanks >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bunch+unsubscr...@googlegroups.com. >> To post to this group, send email to rbw-owners-bunch@googlegroups.com. >> Visit this group at https://groups.google.com/group/rbw-owners-bunch. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
