OK ... looks like I need to get a rat tail file. There doesn't seem to be all that much material available to file away without getting into the case itself. Did you have to take a little of the case material too? Did you disassemble the lock to file it or were you able to get at it by just removing the trim ring?
On Thursday, January 18, 2018 at 10:28:18 AM UTC-7, lconley wrote: > > Yes, filing of the lock with a rat-tail file helps a lot.. It also helps > to start each machine screw (not technically a bolt) into the frame before > tightening or snugging either one. > > Laing > > On Thursday, January 18, 2018 at 12:23:31 PM UTC-5, Tim wrote: > >> I’m trying to install an AXA Victory Framelock to my Clem. The mounting >> braze-ons on the frame are just slightly too far apart to match-up with the >> mounting slots on the lock. Mark at Riv says it’s a difficult lock to >> install ... requires filing away material on the lock to make it work. Has >> anyone here installed this lock and have any tips? > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.