A bike that required frame and fork alignment from a front end crash deserves a new headset.
Hopefully just an unstated part of all the work performed on your bike. I can't imaging clamping up a bike frame for cold set adjustment at a frame table with the pressed headset parts installed. Was the head tube re-prepped ("gaging" if no material removed?) prior to pressing the cup, race? Hopefully just assuring that the tool moves into the ends of the tube without slop or bind, and the mill faces quickly verify the ends to be parallel prior installing a fresh headset. Andy Cheatham Pittsburgh On Sunday, January 21, 2018 at 5:27:06 PM UTC-5, John G. wrote: > > Hi everyone, > > First, a disclaimer: I may be crazy, and this may all be in my head. > > Backstory: Back in Oct, I collided with another cyclist while riding my > Atlantis. The fork and headtube were knocked out of alignment. Took the > bike to my shop, who sent it to one framemaker to get it realigned. > According to my shop, the framemaker did a decent job with the headtube, > but didn't quite get the fork right. So I'm told the fork went off to > Waterford, who realigned it and sent it back to the shop. There's no > documentation or receipts for any of this, but I have no reason to doubt > why my shop told me. > > Since getting the bike back from the shop, I've noticed that the handling > feels a bit off. Symptoms are: > > 1. The tracking feels wobbly, as if the bike has to work reaaaaaally hard > to hold a straight line. It's much more noticeable when I ride one-handed. > 2. This one is harder to explain, but a bit scarier: on long, gently > curving descents, the front end has a tendency to dip suddenly when I go > into the curve. There's then a feeling that the bike rights tries to right > itself, and it wobbles a bit more. > > Things I'm trying to rule out: > - front wheel is out of true. I'm 95% the wheel is true, but I haven't put > it into a truing stand. > - stem/handlebars are off-center. I'm driving myself crazy on this one, > but I'm pretty sure everything is centered. > > Any ideas? Any recommendations? > > Thanks, > John > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.