I haven’t transitioned to a rear child seat yet and still have some use left in our Yepp mini front. I also don’t own a huge Rosco mixte (somewhat regrettably... I chose a 65cm Clem H instead for a few reasons but kind of wish I had both, though they sold so quickly I’d have missed out anyway.)
But having recently pulled out the Clem H for fall riding I just tried to mount a pletscher twin leg only to find two issues: It does not clear a 29x2.2 (continental mountain king) and the thickness of the kickstand plate did it allow the base of the double kickstand to sit flush. So the pletscher went back on the bike it started with and the stock single leg went back on the Clem and all is well. Assuming you have similar clearances on the Rosco it’ll likely depend in tire size which stand you’ll need. I know the incoming Gus Boots-Willsen compensates for tire clearance with an offset bolt hole in the kickstand plate but I’ve just learned the limitations of the pletscher twin legger and will keep it on bikes with sub 2” rubber. Best, Brian Cole Lawrenceville NJ -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/58683fe5-2116-4ac3-8823-69d041973509%40googlegroups.com.