It's becoming more and more commonplace to run a 1x drivetrain. Your existing XD2 with a nice narrow-wide ring, intelligently chosen, could be a really smart setup. I've had very good success with a 42T ring, and an 11-28 or 11-32 cassette, but I have hills to speak of. With really no hills to speak of, you could go even smaller in the cassette, like 11-26. If you are never pedalling over 40MPH then you likely don't need higher than a 42x11.
Bill Lindsay El Cerrito, CA On Thursday, March 19, 2020 at 10:20:51 PM UTC-7, Bones wrote: > > I could use some input on what type of crank would work best for me here. > I will be using the bike as a sporty, zip around the river bike. No club > rides or racing or anything like that. I live in south Jersey, so no hills > to speak of, just wind. The wide/lows on my Appaloosa and Clem are perfect, > and I don't spend much time on the big ring on my Sam's triple. I'd like to > keep the gearing minimal but functional, and of course it has to look > handsome on the Roadini. I have an extra RD2 crank from a single speed > lying around, maybe I can do something with that? I'm not opposed to > getting something new... > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/2ac2e048-7a39-4f6a-bc04-f3bd0a5df3f1%40googlegroups.com.
