Thanks for posting. The info that James has posted on Analog's site is 
great and aligns with my experiences and struggles. I've converted my 
wider-tired bikes to tubeless for the same reasons: 1. lower pressure w/o 
pinch flat fears 2. strikingly fewer flats, almost none. 

I would also be interesting in the differences between setting up wider rim 
tire combos and road 28-32mm tires that are run at higher pressures. So 
far, I've only set up my fatter >38mm tire bikes. But, I'm about to set up 
a regular-ass road bike wheelset with 28mm Conti 5000TL tires.

Scott Calhoun


On Wednesday, April 15, 2020 at 5:49:23 AM UTC-7, Tim Bantham wrote:
>
> There's been some discussion on the board lately about the pros and cons 
> of tubeless tires. I am a tubeless believer but I wasn't always that way. I 
> wanted to share my experiences as a way of adding some perspective to those 
> considering giving it a go. Analog cycles is doing an Instagram live on 
> tubeless tonight at 5:00 PM ET. You should watch it if you are remotely 
> interested. Much of my current tubeless knowledge was gained by talking 
> with James and Candice. Before I met the good folks at Analog I had quite a 
> bit of experience with tubeless setups. Some good and some not so good. 
>
> The first thing I'll make clear is that you can continue to run tubes in 
> your tires and be perfectly happy for the remainder of your biking life. 
> Nothing wrong with that. Tubeless is not going to rock your world. However, 
> there are many benefits to setting your tires up tubeless. I'd like to 
> share those with you based on my own experiences. 
>
> You can run low pressure without fear of getting a pinch flat. If you are 
> a Riv fan you already know the benefit of soft tires. Subtle ride quality 
> with lots of cush to absorb the bumps. To me this is worth it alone but 
> there are other benefits. 
>
> Much easier to fix a flat tire. True confession I rarely get a flat tire 
> with tubeless. If you get a small puncture sometimes just riding the tire 
> allows sealant to get into the hole and seal the tire. If it doesn't seal 
> you have to plug the hole. Let's say you run over a nail. You can fix the 
> flat without removing the wheel. Murphy's law is that 75% of your flats 
> will be on the rear tire.With a tube you have to take the rear wheel off in 
> the field. No big deal right? I know... I've done it tons of times. That 
> said, if I can avoid doing so why wouldn't I? With tubeless you can plug 
> the hole without removing the wheel from the bike. That to me that is a 
> significant benefit. Of course there remains the possibility that you can 
> get a gash in the sidewall. That happens but if you are prepared with 
> gorilla tape and gorilla glue you can fix that without removing the wheel 
> from the bike as well. 
>
> Final tips: 
>
>    - Get the Dynapill made by Dynaplug for your tubeless repairs. 
>    - Still carry a tube with you. A tube could always be installed as a 
>    last resort but it should be rare. 
>    - Invest in a good air compressor. An air compressor is handy! The 
>    pumps that are sold claiming to seat tubeless tires don't work as claimed. 
>    I know because I own one. 
>    - Don't try to seat tubeless with a regular bicycle pump. Doesn't work 
>    and not worth the frustration. See above. 
>    - Use Orange Seal Endurance Sealant. Best sealant on the market. Blows 
>    away anything else I've ever tried. 
>    - The tubeless tape that Analog sells is fantastic! Easy to work with, 
>    has the right amount of stretch. 
>    - Don't try to set up any old rim/tire combo tubeless. Look for rims 
>    that are advertised as tubeless. I have Velocity Cliffhangers and Quills 
> on 
>    my bikes. Both set up easily.  
>    - Buy a tubeless ready tire. 
>    - Don't worry about sealant randomly oozing out of your tire. Doesn't 
>    happen if you set everything up correctly.
>    - Use a regular bicycle pump to maintain air in your tires after 
>    successful set up. 
>    - Refill with fresh sealant every six months.
>    - Buy the Park Tools valve core remover to make adding fresh sealant 
>    easier. 
>
> Hit me up with any questions. Do watch the tubeless set up live show 
> tonight on Instagram and go to Analogs website for tubeless set up tips. 
>
> Tim
>
>
>
>
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/90da795b-3225-4979-8655-33fff08a3dee%40googlegroups.com.

Reply via email to