Nikko, I've had the same problem with my Silver 2 Shifters...very handsome but (besides immediate rusting on the bolts) they just don't really work - I have to tighten them so much that they're hard to shift, and then they slip back again a few shifts later. I don't have this problem with my old Silver shifters, set up downtube.
On Thursday, October 8, 2020 at 8:21:21 AM UTC-4 lconley wrote: > Note that if you use brake housing or non-index shifter cable housing for > your shifter cable housing, it can cause derailleur movement under load and > when turning if your shifters are bar or stem mounted. This was not of > concern back when freewheels had five (yes I am old) or six widely spaced > cogs, but if you are running 9, 10, 11+ cogs, it may contribute to unwanted > gear changes. Irrelevant if the shifter is slipping because it is loose, > but something to check if the shifter is not at fault > > Laing > Delray Beach FL > >> >>>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/9f5f6af8-75c6-43ad-bd7a-3a33cd67eb3cn%40googlegroups.com.
